期刊文献+

不同PMMA对ABS/PMMA合金性能的影响 被引量:6

Influence of Different Types of PMMA on Properties of ABS/PMMA Alloy
下载PDF
导出
摘要 试验采用两种不同的聚甲基丙烯酸甲酯 (PMMA)与ABS进行共混。并对ABS/PMMA共混物的各项性能进行了较详细的研究。试验结果表明 ,不同分子量的PMMA对ABS/PMMA混合物的光学性能。 Two different types of PMMA were blended with ABS respectively, and the properties of ABS/PMMA blends were investigated in detail. The result showed that the two ABS/PMMA blends widely differed from each other in optical property, mechanical property, and rheological behavior because of the different molecular weight of PMMA.
出处 《塑料科技》 CAS 2002年第6期1-4,共4页 Plastics Science and Technology
  • 相关文献

参考文献1

  • 1吴培熙 张留城.聚合物共混改性[M].北京:中国轻工业出版社,1998.166.

共引文献17

同被引文献143

  • 1章瑛虹,傅荣政,王芳,郁剑乙.ABS/SMA合金的研究及应用[J].塑料工业,2005,33(11):20-22. 被引量:8
  • 2于环洋.ABS/PMMA合金性能研究[J].吉林建筑工程学院学报,2006,23(4):40-42. 被引量:3
  • 3吴郁.ASA/PVC共混改性技术在PVC彩色共挤型材加工中应用研究[J].宁波化工,2007(1):18-21. 被引量:9
  • 4王承鹤.塑料摩擦学[M].北京:机械工业出版社,1994.
  • 5Qifang Li, Ming Tian.Compatibility and thermal properties of poly (acrylonitrile-butadiene-styrene) copolymer blends with poly(methylmethacrylate) and poly(styrene-coacrylonitrile)[J].Journal of Applied Polymer Science, 2002, 85:2 652-2 660.
  • 6M J Oliveira, A M Brito, M C Costa. Gloss and surface topography of ABS: a study on the influence of the injection molding parameters[J]. Polymer Engineering and Science. 2006(10):1 395-1 401.
  • 7Francesco Pisciotti, Antal Botdizar, Mikael Rigdahl. Effects of injection-molding conditions on the gloss and color of pigmented polypropylene[J]. Polymer Engineering and Science, 2005,45(12): 1 557-1 567.
  • 8S M Lee, C H Choi, B K Kim. Effect of matrix SAN in ABS/ PMMA blends[J]. Journar of Applied Polymer Science, 1994(10): 609-621.
  • 9黄承亚,李贇,阎利,等.纳米相聚合物增韧有机玻璃的研究[C]//中国材料研讨会论文集.北京:冶金工业出版社,2002:197-202.
  • 10FOWLER M,BARLOW J,PAUL.D.Kinetics of adhesion development at PMMA-SAN interfaces[J].Polymer,1987,28(12):2145-2150.

引证文献6

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部