摘要
根据静负荷性能试验数据,利用软件插值计算出缺气保用轮胎在不同负荷下所允许使用的最小安全充气压力。试验测得,225/55ZRF17 97W标准型和225/55ZRF17 101W增强型缺气保用轮胎在各自标准充气压力和标准负荷下的标准下沉量分别为26.07和21.15 mm。软件计算分析表明,在标准下沉量下,单胎负荷为455 kg时,225/55ZRF17 97W标准型和225/55ZRF17 101W增强型缺气保用轮胎允许使用的最小安全充气压力分别为112和54 kPa。汽车更换不同品牌的缺气保用轮胎时,应重新计算轮胎的最小安全充气压力,校正胎压监测报警系统。
Based on the static load test data,the minimum safe inflating pressure of run-flat tire under different loads was calculated by interpolation method using software.The test results showed that the standard sinkages of 225/55ZRF17 97W standard run-flat tire and 225/55ZRF17 101W enhanced run-flat tire were 26.07 and 21.15 mm,respectively,under their respective standard inflating pressures and standard loads.The software analysis showed that under the standard sinkages,the minimum safe inflating pressures of 225/55ZRF17 97W tire and 225/55ZRF17 101W tire were 112 and 54 kPa,respectively,when the single tire load was 455 kg.When the run-flat tires were replaced by different brands,the minimum safe inflation pressure of tires should be recalculated and the tire pressure monitoring and alarming system should be calibrated.
作者
刘昌波
王志勇
罗哲
于国鸿
邓涛
何晓玫
LIU Changbo;WANG Zhiyong;LUO Zhe;YU Guohong;DENG Tao;HE Xiaomei(Prinx Chengshan(Shandong)Tire Co.,Ltd,Weihai 264300,China;Qingdao University of Science and Technology,Qingdao 266042,China;Beijing Research and Design Institute of Rubber Industry Co.,Ltd,Beijing 100143,China)
出处
《橡胶科技》
2019年第8期435-438,共4页
Rubber Science and Technology
关键词
缺气保用轮胎
充气压力
胎压监测报警系统
静负荷
下沉量
run-flat tire
inflating pressure
tire pressure monitoring and alarming system
static load
sinkage