期刊文献+

关于CAE技术在汽车车架设计中的应用 被引量:2

Application of CAE technology in frame design of vehicle
下载PDF
导出
摘要 汽车车架是汽车的主要承载体,承受多种载荷,对整车的使用寿命和安全有着重要影响。在整车设计时,必须对车架强度进行分析。利用CATIA软件进行汽车车架零件CAD建模,结合CAD模型对车架进行有限元建模,建立四种典型工况对车架强度进行分析,通过有限元软件计算,求得各工况下的静态安全因子和应力分布。 The vehicle frame is the main carrier,which bears many kinds of loads.In the whole ve-hicle design,the frame strength must be analyzed.CATIA is used to carry out CAD modeling of ve-hicle frame parts,and FE modeling is carried out on the frame based on the CAD model.Four typ-ical working conditions are established to analyze the strength of the frame,and the static safety factor and stress distribution under each working condition are obtained through the calculation of the FE model.
作者 杨强 王文磊 张琦 王宏斌 王珊珊 Yang Qiang;Wang Wenlei;Zhang Qi;Wang Hongbin;Wang Shanshan(Shaanxi Steam Group Commercial Vehicle Co.,Ltd.,Shaanxi Baoji 721000)
出处 《汽车实用技术》 2019年第19期116-118,共3页 Automobile Applied Technology
关键词 有限元分析 车架 结构 FE analysis vehicle frame structure
  • 相关文献

参考文献2

二级参考文献3

  • 1谷安涛 常国振.汽车车架设计计算的有限元法[J].汽车技术,1997,(6):61-64.
  • 2周中坚 卢耀祖.机械与汽车结构的有限元分析[M].上海:同济大学出版社,1997..
  • 3王家林.薄壁杆系结构有限元的新算法[J].机械强度,1984,6(4):68-73.

共引文献33

同被引文献6

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部