期刊文献+

玻纤增强PA66复合材料的力学性能 被引量:7

下载PDF
导出
摘要 以30%的玻纤增强尼龙66,通过注塑工艺注塑成标准件,研究了玻纤增强尼龙66复合材料的力学性能,结果表明:玻纤增强PA66的拉伸强度、弯曲强度、冲击强度的平均值分别为154.34Mpa、224.25 Mpa、59.27 KJ/m^2,力学性能有明显的提升。
机构地区 山东科技大学
出处 《西部皮革》 2019年第19期128-128,共1页 West Leather
  • 相关文献

参考文献3

二级参考文献15

  • 1卡恩RW 哈森P 克雷默EJ 吴人洁 等译.复合材料的结构与性能[M].北京:科学出版社,1999..
  • 2Hamdid, Salehi-Mobarakeh, Brisson J, et al. Ionic inter-phase of glass fiber/polyamide 66 composites. Polymer Compos, 1998,19 (3) :264.
  • 3Thomason J L. The influence of fiber properties on the properties of glass-fiber-reinforced polyamide 66. J Compos Mater, 2000,34 ( 2 ) :158.
  • 4Chol N S,Yamaguchi, Takahashi. Fracture behavior of unidirectional commingled-yarn-based carbon fiber/polyamide 6 composite under three-point bending. J Compos Mater,2000, 34(6) :760.
  • 5Jia N Y, Val A, Kagan. Effects of time and temperature on the tension-tension fatigue behavior of short fiber reinforced polyamides. Polymer Compos, 1998,19(4) :408.
  • 6Eriksson P A, Albertsson A C. Influence of impurities on mechanical properties of recycled glass fiber reinforced polyamide 66. Polymer Eng Sci, 1998,8 (5) :749.
  • 7Bucknall C B, Clayton D, Keast W D.J Mater Sci, 1992, (7):1443.
  • 8Donald R, Bucknall C B.Pure Appl Chem, 1976, 46:277.
  • 9Norman G.Compatibilizing agents:Structure and function in polymer blends[J].Journal of Macromolecules Science Chemisttry,1989,26(8):1 211-1 229.
  • 10Kudva R A,Keskkula H,Paul D R,et al.Morphology and mechanieal properties of compatibilized nylon 6/PE blends[J].Polymer,1999,40(22):6003-6021.

共引文献55

同被引文献63

引证文献7

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部