摘要
针对高速载波通信单元台区识别范围不准确的问题,提出了一种高速载波通信单元台区识别检测系统及测试方法。台区识别检测系统通过构建两个网络,每个网络实际控制4个屏蔽箱,通过控制屏蔽箱9与屏蔽箱4、8之间的衰减、噪声,来模拟现场不同台区之间的通信差异,进而测试不同场景下的无扰台区识别准确性。重点介绍高速载波通信单元检测系统的硬件结构和软件设计。实验结果显示,设计系统的检测时间短,且准确性高。
Aiming at the problem of inaccurate identification range of high-speed carrier communication unit,a high-speed carrier communication unit station identification detection system and test method is proposed.The station identification detection system builds two networks,each network actually controls 4 shielding boxes,and simulates the communication difference is simulated between different stations in the field by controlling the attenuation and noise between the shielding box 9 and the shielding boxes 4 and 8.In turn,the accuracy of the non-perturbation area identification in different scenarios is tested.The hardware structure and software design of the high-speed carrier communication unit detection system are mainly introduced.The experimental results show that the design system has a short detection time and high accuracy.
作者
宋玮琼
羡慧竹
李杰
王学良
逄林
卢再锋
SONG Weiqiong;XIAN Huizhu;LI Jie;WANG Xueliang;PANG Lin;LU Zaifeng(State Grid Beijing Electric Power Research Institute,Beijing 102600,China;China Gridcom Co.,Ltd.,Shenzhen 518031,China)
出处
《自动化与仪器仪表》
2019年第11期135-137,148,共4页
Automation & Instrumentation
基金
国网信息通信产业集团有限公司科技项目资助项目“电、水、气、热能源计量一体化采集关键技术研究及应用项目”(No.536808180001)
关键词
台区识别
检测系统
区分度
衰减器
area recognition
detecting system
discrimination
attenuator