期刊文献+

Selective generation of individual Raman Stokes lines using dissipative soliton resonance pulses

Selective generation of individual Raman Stokes lines using dissipative soliton resonance pulses
原文传递
导出
摘要 Pumped by rectangular-shaped dissipative soliton resonance(DSR)pulses at 1030 nm,selective excitations of Raman Stokes lines of up to third order with extinction ratios of 8 d B and fifth order with extinction ratios of 4 dB are demonstrated experimentally.The rectangular DSR pulses are generated from a dual-amplifier ytterbium-doped figureof-eight mode-locked laser constructed using all 10μm-core-diameter large-mode-area fibers.By varying the two pump powers,the peak power of the output DSR pulses can be continuously tuned from 10 W to 100 W and from 30 W to200 W,respectively,for two different lengths of the nonlinear amplifying loop mirror inside the cavity.High-frequency components are found to correspond to parts of the pulse in the trailing edge when two bandpass filters are used to separate the propagated pulse.Consequently,it provides an all-fiber technique to achieve selective excitation of the Raman shift by adjusting the peak power of the DSR pulse. Pumped by rectangular-shaped dissipative soliton resonance(DSR) pulses at 1030 nm, selective excitations of Raman Stokes lines of up to third order with extinction ratios of 8 d B and fifth order with extinction ratios of 4 d B are demonstrated experimentally. The rectangular DSR pulses are generated from a dual-amplifier ytterbium-doped figureof-eight mode-locked laser constructed using all 10 μm-core-diameter large-mode-area fibers. By varying the two pump powers, the peak power of the output DSR pulses can be continuously tuned from 10 W to 100 W and from 30 W to200 W, respectively, for two different lengths of the nonlinear amplifying loop mirror inside the cavity. High-frequency components are found to correspond to parts of the pulse in the trailing edge when two bandpass filters are used to separate the propagated pulse. Consequently, it provides an all-fiber technique to achieve selective excitation of the Raman shift by adjusting the peak power of the DSR pulse.
出处 《High Power Laser Science and Engineering》 SCIE CAS CSCD 2019年第3期60-66,共7页 高功率激光科学与工程(英文版)
基金 supported by the National Natural Science Foundation of China (NSFC) (No. 61235008) the National High Technology Research and Development Program of China (No. 2015AA021101)
关键词 MODE-LOCKED laser RAMAN CONVERSION fiberized system mode-locked laser Raman conversion fiberized system
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部