期刊文献+

并行重叠/变形混合网格生成技术及其应用 被引量:2

Dynamic Hybrid Mesh Generator Coupled with Overset and Deformation in Parallel Environment
下载PDF
导出
摘要 为了适用于柔性变形、相对运动等复杂动边界问题,建立了并行环境下重叠和变形相结合的动态混合网格生成技术.通过计算区域分解以及分布式并行实现了重叠和变形技术的结合,其中重叠网格采用了并行化的隐式装配方法,并发展了两种并行化查询策略.变形网格则采用了并行化的径向基函数(RBF)插值方法.并行化动态网格生成方法大幅提高了动态网格生成效率,有利于处理大规模的动边界问题.在此基础上,发展了基于变形/重叠动态混合网格的流动/运动/控制一体化数值模拟方法,进一步改进了耦合模拟软件平台——HyperFLOW.典型应用算例证明了该动态混合网格技术及一体化算法的实用性. A deforming/overset coupled hybrid moving grid generation method was developed in parallel environment to deal with complex engineering problems of both boundary deformation and relative movement.The coupled method is based on a domain decomposition strategy and distributed parallel process.The parallel implicit-hole-cutting method based on the minimum distance to wall is adopted,and two parallel donor cell searching methods have been developed.The interpolation method based on parallel radial basis function(RBF)is adopted for mesh deformation.Based on the coupled hybrid moving grids,the numerical virtual flight solver,HyperFLOW,was improved.The coupled simulation system integrates the parallel unsteady RANS solver on the deforming/overset moving grids,six degrees of freedom(6DOF)motion solver,and flight control system.Some typical applications demonstrate the capability of present method.
作者 常兴华 王年华 马戎 田润雨 张来平 CHANG Xing-hua;WANG Nian-hua;MA Rong;TIAN Run-yu;ZHANG Lai-ping(State Key Laboratory of Aerodynamics,China Aerodynamics Research and Development Center,Mianyang 621000,China;Computational Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang 621000,China;Hypervelocity Aerodynamics Institute,China Aerodynamics Research and Development Center,Mianyang 621000,China)
出处 《气体物理》 2019年第6期12-21,共10页 Physics of Gases
基金 国家重点研发计划(2016YFB0200701) 国家自然科学基金(11532016,11672324)
关键词 重叠网格 变形网格 并行动态网格生成 数值虚拟飞行 耦合算法 overset mesh deforming mesh parallel moving grid generation numerical virtual flight coupling method
  • 相关文献

参考文献6

二级参考文献72

  • 1李亭鹤,阎超,李跃军.重叠网格技术中割补法的研究与改进[J].北京航空航天大学学报,2005,31(4):402-406. 被引量:6
  • 2PERKINS D A, REED J I., HAVENS J E. Morphing wing structures for loitering air vehicles [R]. AIAA 2004-1888.
  • 3RAMRKAHYANI D S, LESIENTURE G A. Aircraft structural morphing using tendon actuated compliant cellular trusses[R]. AIAA 2004-1728.
  • 4SECANELL M, SULEMAN A, GAMBOA P. Design of a morphing airfoil for a light unmanned aerial vehicle using high-fidelity aerodynamic shape optimization[R]. AIAA 2005-1891.
  • 5LIU H, WASSERSUG R J, KAWACHI K A. The three- dimensional hydrodynamics of tadpole locomotion [J]. J. Exp. Biol., 1997, 200: 2807-2819.
  • 6WU J W, SUN M. Unsteady aerodynamics forces of a flapping wing[J]. J. Exp. Biol., 2004(207): 1413- 1427.
  • 7NAKAHASHI K, TOGASHI F. An intergrid-boundary definition method for overset unstructured grid approach[R]. AIAA-99 3304.
  • 8LOHNER R, SHAROY D, LUO H, et al. Overlapping unstructured grids[R]. AIAA-01-0439.
  • 9GRUBE B, CARSTENS V. Computational of unsteady transonic flow in harmonically oscillating turbine cascades taking into account viscous effects[J]. ASME Journal of Turbomachinery, 1998,120 ( 1 ) : 104-111.
  • 10SCHULZE S. Transonic aeroelatic simulation of a flexi ble wing section[A]. AGARD structures and Materials Panel workshop on Numerical Unsteady Aerodynamics and Aeroelastics Simulation[C]. AGARD R-822, Aalborg, Denmark,13-17 October 1997,10;1-10:20.

共引文献51

同被引文献18

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部