摘要
为了掌握潘河区块15号煤层煤层气的生产动态特征,确定影响产能释放的主要因素,实现区域内产气量的平稳接替和潘河区块煤层气的稳定有序开发,本文以潘河区块所实施的15号煤层煤层气试验井为研究对象,统计分析了生产动态参数,全面研究了排采过程中的产水、产气和产煤粉的变化趋势、特征以及影响因素。研究结果表明:15号煤层煤层气储层具有产水量低、高产气井少和煤粉产出量大的特点,产水量和产煤粉量对产气量有明显的抑制作用;在区块整体开发期,区内煤层气井适宜部署在煤层气保存较好的包括背斜等构造高点及斜坡,且含气量超过20 m 3/d,水动力条件弱的滞留水区;施工液量对压裂效果影响较大,尤其是造缝功能的前置液,在压裂正常情况下以及前置液量在110~210 m 3范围内,液量和产气量同步变化;在排采过程中,排采初期的降液速度、见气初期的流压控制以及排采的连续性是影响区内煤层气井产能释放的主要原因。
In order to obtain the production dynamic characteristics of No.15 coal seam in the Panhe block,identify the main factors affecting its productivity and achieve the its stable development,this paper takes the coal bed gas test wells of No.15 coal seam as a research object,analyses the production performance of these wells and investigates the water production,gas yield,pulverizes coal production and their influencing factors.The results show that the No.15 coal seam in the Panhe block is characterized by low water production,lack of high gas yield well and high pulverized coal production,the water production and pulverized coal significantly reduce the gas yield;in the integral development phase,the coalbed gas well should take precedence to be arranged in upper bend and high point of structure where gas content should exceed 20 m 3/t and areas belong to weaker hydrodynamics;fracturing effect is greatly affected fracturing fluid quantity,especially prepad fluid for producing gaps,prepad fluid quantity synchronously changes with gas yield when prepad fluid quantity ranges from 110 m 3 to 210 m 3;pressure decay rate,initial control when gas appearance and drainage continuity are main reasons influencing gas yield in the process of drainage gas recovery.
作者
徐文军
刘升贵
孟磊
XU Wenjun;LIU Shenggui;MENG Lei(China United Coalbed Methane Co.,Ltd.,Beijing 100016,China;School of Mechanics and Civil Engineering,China University of Mining and Technology(Beijing),Beijing 100083,China)
出处
《中国矿业》
北大核心
2019年第12期155-160,共6页
China Mining Magazine
基金
中国海洋石油集团有限公司综合科研项目“潘庄区块煤层气生产规律及稳产技术研究”资助(编号:JTKY-2018-ZL-01)
关键词
潘河区块
15号煤层
煤层气
生产特征
影响因素
Panhe block
No.15 coal seam
coalbed gas
production characteristics
influencing factor