摘要
利用SOLPS软件,采用有限元数值计算方法,模拟计算了HL-2M装置雪花减偏滤器靶板上热负载分布,分析了偏滤器温度及热应力分布,并使用ITER内部器件设计评判标准对HL-2M偏滤器结构进行热疲劳寿命的评估。结果表明,在低周循环下靶板大部分区域不会经历严重的塑性疲劳,但距离外侧抽气口4mm位置拱顶区域循环寿命约为1963次。模拟结果对HL-2M装置偏滤器设计具有一定参考意义。
The heat flux distribution on the plasma facing surfaces of divertor for HL-2M tokamak has been simulated with the SOLPS code.Temperature and thermal stress have been calculated with finite element method,and the fatigue life of divertor has been evaluated with the structural design criteria for ITER in-vessel components(SDC-IC).The results indicate that most area of the target planes do not experience severe plastic fatigue under the cycles.But,the fatigue life of dome plane,4 mm away from outer pumping port,is approximately 1963 times.This result might be useful for HL-2M tokamak divertor design.
作者
沈俊田
袁应龙
姚列明
张旺
陈雅静
周明涛
文豪
吴静
SHEN Jun-tian;YUAN Ying-long;YAO Lie-ming;ZHANG Wang;CHEN Ya-jing;ZHOU Ming-tao;WEN Hao;WU Jing(University of Electronic Science and Technology of China,Chengdu 610054;Southwestern Institute of Physics,Chengdu 610041)
出处
《核聚变与等离子体物理》
CAS
CSCD
北大核心
2019年第4期324-330,共7页
Nuclear Fusion and Plasma Physics
基金
国家磁约束核聚变能发展研究专项(2015GB120004)
中央高校基本科研业务费资助(ZYGX2018J090)
关键词
HL-2M装置
雪花减偏滤器
热应力
热疲劳
HL-2M tokamak
Snowflake-minus divertor
Thermal stress
Thermal fatigue