摘要
A novel magnetorheological finishing(MRF)process using a small ball-end permanent-magnet polishing head is proposed,and a four-axes linkage dedicated MRF machine tool is fabricated to achieve the nanofinishing of an irregularψ-shaped small-bore complex component with concave surfaces of a curvature radius less than3 mm.The processing method of the complex component is introduced.Magnetostatic simulation during the entire finishing path is carried out to analyze the material removal characteristics.A typicalψ-shaped small-bore complex component is polished on the developed device,and a fine surface quality is obtained with surface roughness Raof 0.0107μm and surface accuracy of the finished spherical surfaces of 0.3320μm(PV).These findings indicate that the proposed MRF process can perform the nanofinishing of a kind of small-bore complex component with small-curvature-radius concave surfaces.
A novel magnetorheological finishing(MRF) process using a small ball-end permanent-magnet polishing head is proposed, and a four-axes linkage dedicated MRF machine tool is fabricated to achieve the nanofinishing of an irregular ψ-shaped small-bore complex component with concave surfaces of a curvature radius less than3 mm. The processing method of the complex component is introduced. Magnetostatic simulation during the entire finishing path is carried out to analyze the material removal characteristics. A typical ψ-shaped small-bore complex component is polished on the developed device, and a fine surface quality is obtained with surface roughness Raof 0.0107 μm and surface accuracy of the finished spherical surfaces of 0.3320 μm(PV). These findings indicate that the proposed MRF process can perform the nanofinishing of a kind of small-bore complex component with small-curvature-radius concave surfaces.
基金
supported by the National Key Research and Development Program of China [grant number 2018YFB1107600]
