期刊文献+

基于FPGA的传感器噪声信号采集压缩存储系统的设计 被引量:6

Design of Sensor Noise Signal Acquisition and Compression Storage System Based on FPGA
下载PDF
导出
摘要 在航天遥测系统中,为了提高传感器的噪声信号传输以及存储的稳定性和效率,设计了一种以FPGA为主控制核心的噪声信号采集压缩和存储系统,采集到的四路传感器噪声信号由ADS8365进行模数转换,然后由TMS320C6416芯片将转换后的数据进行压缩,并由K9WBG08U1M存储芯片对数据进行存储。经过多次的实际测试结果显示,系统的可靠性高,可以有效地提高噪声信号的传输及存储效率。 In the aerospace telemetry system,in order to improve the noise signal transmission and storage stability and efficiency of the sensor,a noise signal acquisition compression and storage system based on FPGA is designed.The four sensor noise signals collected by ADS8365 are designed.The analog-to-digital conversion is performed,and then the converted data is compressed by the TMS320C6416 chip,and the data are stored by the K9WBG08U1M memory chip.After many actual test results show that the system has high reliability and can effectively improve the transmission and storage efficiency of noise signals.
作者 杜宇宁 辛海华 张会新 亓岳岩 DU Yuning;XIN Haihua;ZHANG Huixin;QI Yueyan(National Key Laboratory of Electronic Measurement Technology,North University of China,Taiyuan 030051,China;Key Laboratory of Instrumentation Science and Dynamic Measurement of Ministry of Education,Taiyuan 030051,China;Beijing aerospace systems engineering institute,Beijing 100076,China)
出处 《电子器件》 CAS 北大核心 2019年第6期1547-1551,共5页 Chinese Journal of Electron Devices
基金 国家自然科学基金项目(51635011,61503346,51727808)
关键词 传感器 噪声信号 数据压缩 存储系统 FPGA sensor noise signal data compression storage system FPGA
  • 相关文献

参考文献6

二级参考文献15

  • 1詹辛农.运载火箭遥测数据压缩技术研究[J].导弹与航天运载技术,1997(1):38-48. 被引量:10
  • 2吴乐南.无失真预测编码的研究.东南大学博士学位论文[M].,1997,3.48.
  • 3蔡弘.航天遥测数据无损压缩方法研究.清华大学硕士学位论文[M].,1995,10..
  • 4吴乐南,博士学位论文,1997年,48页
  • 5蔡弘,硕士学位论文,1995年
  • 6刘蕴才 房鸿瑞 张仿.遥测遥控系统[M].北京:国防工业出版社,2000..
  • 7谷岩.载人运载火箭可靠性技术[J].导弹与航天运载火箭技术,2004,(1).
  • 8何国伟.可靠性工程[M].北京:宇航出版社,1995.
  • 9邵发声.运载火箭遥测系统[M].北京:国防工业出版社,2004:109-163.
  • 10沈振元,聂志泉,赵雪荷.通信系统原理[M].西安:西安电子科技大学出版社,1994:427-437.

共引文献30

同被引文献68

引证文献6

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部