摘要
为提高PbO2的电容性能,采用复合共沉积法将纳米WO3粒子掺杂进PbO2基质中,制备得到WO3/PbO2复合电极材料.利用扫描电镜及电化学测试等分析方法,详细研究了沉积温度、沉积电流、粒子浓度及搅拌程度等工艺条件对材料形貌及电容性能的影响,并进一步优化了工艺条件.
The nano-WO3 was imbedded into the PbO2 matrix for increasing the pseudocapacitance of PbO2.The WO3/PbO2 composite electrode materials were prepared by the composite electrodeposition method.The influences of process conditions such as the electrodeposition temperature,electrodeposition currents,concentration of the particles and stirring,on the morphology and the capacitance performance of the composite material were investigated by scanning electron microscope(SEM)analyses and electrical tests.Furthermore,the process conditions were optimized for the composite electrodeposition of the WO3/PbO2 composite electrode.
作者
孙园园
冯伟超
葛骊超
顾雷香
丹媛媛
SUN Yuanyuan;FENG Weichao;GE Lichao;GU Leixiang;DAN Yuanyuan(School of Enviromental and Chemical Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003,China)
出处
《江苏科技大学学报(自然科学版)》
CAS
2019年第6期88-92,共5页
Journal of Jiangsu University of Science and Technology:Natural Science Edition
基金
国家自然科学基金资助项目(51502117)
江苏省镇江市重点研发计划(社会发展)基金资助项目(SH2017051)
关键词
复合共沉积
三氧化钨
二氧化铅
composite electrodeposition
tungsten trioxide
lead dioxide