期刊文献+

附合导线角度闭合差计算的多边形辅助线法

Polygonal Auxiliary Line Method for Angle Closure Error of Annexed Traverse
下载PDF
导出
摘要 附合导线是工程测量中使用频率较高的一种导线形式,为了提高附合导线计算的效率,提出附合导线角度闭合差计算的多边形辅助线法。传统做法在角度闭合差计算中需逐点推算坐标方位角,区分各角为左角还是右角、逐边分析是否加减180°,当导线点增多时内业计算烦琐。多边形辅助线法则不需以上步骤,在导线点增多时不会增加内业计算量。 Annexed traverse is widely used in engineering surveying. The polygonal auxiliary line method for angle closure error is presented to improve the computational efficiency of the annexed traverse. In traditional angle closure calculation of annexed traverse,the coordinate azimuth is needed to calculate point-by-point,each traverse angle is necessary to be distinguished as the left angle or right,and every traverse line has to be analyzed one by one to determine whether to add or subtract the value 180 °. Therefore the more traverse points,the more calculations. However,the above procedures are not to be needed by the polygonal auxiliary line method for angle closure calculation of annexed traverse,so the calculation will not be increased when the number of traverse point grows.
作者 李啸天 覃超 王旭华 Li Xiaotian;Qin Chao;Wang Xuhua(College of Civil Engineering and Architectural Dalian University,Dalian 116622,Liaoning)
出处 《城市勘测》 2019年第6期145-148,共4页 Urban Geotechnical Investigation & Surveying
关键词 附合导线 工程测量 角度闭合差 多边形辅助线法 annexed traverse engineering survey angle closure error polygonal auxiliary line method
  • 引文网络
  • 相关文献

参考文献3

二级参考文献14

  • 1熊梅,肖金贵,钟宏.工程测量附合导线的角度闭合差计算分析[J].西华大学学报(自然科学版),2005,24(4):95-96. 被引量:8
  • 2过静君.土木工程测量[M].武汉:武汉工业大学出版社,2000.157-160,183,184.
  • 3邹建风.浅谈三角高程测量法[J].山西建筑,2007,33(25):351-352. 被引量:4
  • 4李生平.建筑工程测量[M].武汉:武汉工业大学出版社,1996..
  • 5钟孝顺 聂让.测量学[M].北京:人民交通出版社,2002..
  • 6顾孝烈,鲍峰.测量学[M].上海:同济大学出版社,2011.
  • 7张正禄,黄琦,彭璇,许雪晴,徐莉.论附合导线及其改进[J].测绘通报,2007(10):1-3. 被引量:4
  • 8张序.测量学[M].南京:东南大学出版社:,2012:131 -135.
  • 9徐正杨.附合导线的精度分析[J].测绘学报,1982,11(4):296 -304.
  • 10何国清.任意形状的方向附合导线的平差和误差计算[J]?中国矿业学院学报,1984(1) :31 -48.

共引文献7

相关主题

;
使用帮助 返回顶部