摘要
本文研究了试验温度、保温时间、电偶位置、过冲温度、试验中断时间对GH2132持久蠕变断裂时间检测结果的影响,并结合GB/T2039-2012提出了各个试验参数的控制范围。通过试验参数的精确控制,将检测数据的误差控制在了±10%以内。
This paper studies the influence of test temperature, holding time, couple position, overshoot temperature and test interruption time on the test results of GH2132 creep rupture time, and proposes the control range of each test parameter in combination with GB/T2039-2012. Through the precise control of test parameters, the error of test data is controlled within ±10%.
作者
汪红晓
Wang Hongxiao(Quality Measurement Department of Jiangyou Changcheng Special Steel Co.,Ltd.,Pangang Group,Jiangyou 621701,Sichuan)
出处
《特钢技术》
CAS
2019年第3期47-50,共4页
Special Steel Technology
关键词
高温持久
试验温度
保温时间
过冲温度
电偶位置
high temperature endurance
test temperature
holding time
overshoot temperature
couple position