期刊文献+

基于Fluent的中间摆臂注射成型工艺参数优化 被引量:1

Optimization of Intermediate Swing Arm Injection Molding Parameters Based on Fluent
下载PDF
导出
摘要 基于CFD计算流体力学计算软件Fluent,把金属粉末注射成形过程看作空气、粉末以及粘结剂的多相流动成形过程。根据模腔注射成形的经验公式所得工艺参数设置相关边界条件并设计正交试验,对汽车发动机中间摆臂注射成形的充模过程进行三维数值模拟,基于试验结果来分析各个实验参数及其交互作用对产品质量的影响,从而为注射成形产品缺陷产生的原因提供直观分析方法,以实现CAE技术对实际生产的指导作用。 In this paper, based on CFD computational fluid dynamics software Fluent, metal powder injection molding process is regarded as a multiphase flow forming process of air, powder and binder. According to the empirical formula obtained cavity injection molding process parameters set relevant boundary conditions and the design of orthogonal test, the middle of the car engine swing arm for injection molding of molding process for three dimensional numerical simulation, based on the test results for the analysis of various experimental parameters and their interaction on the quality of the product, and the causes of defects to injection molding products provide intuitive analysis method, in order to realize the CAE technology guidance for practical production.
作者 赵吉庆 黄晓华 张言中 李威 邢炜烽 ZHAO Jiqing;HUANG Xiaohua;ZHANG Yanzhong;LI Wei;XING Weifeng(School of Mechanical Engineering,Nanjing University of Science and Technology,Nanjing 210094,China)
出处 《机械与电子》 2020年第1期19-22,共4页 Machinery & Electronics
关键词 金属粉末 注射成形 FLUENT 正交试验 流体力学 参数优化 metal powder injection molding Fluent orthogonal test fluid mechanics parameter optimization
  • 相关文献

参考文献7

二级参考文献49

共引文献1036

同被引文献12

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部