摘要
由于条件因素的限制,我国之前的矿井瓦斯气体监测仅仅依靠人工展开,且瓦斯监测设备落后,工人们必须手持瓦斯监测仪进行现场人工监测,而原有的仪器设备也易受到来自于环境温度、压力和视觉等因素的影响,最终造成测量误差。此外,不能持续性检查瓦斯,否则易在瓦斯监测过程中发生各种问题,导致无法正常监测井下施工现场瓦斯的浓度,从而无法保障煤矿生产安全。因此,将着眼于煤矿监控监测系统存在的问题及改造进行讨论,结合实践工作经验,提出相关的改进意见。
Due to the limitations of the conditions,the gas monitoring of coal mines in our country only depended on the manual development,and the gas monitoring equipment was also very backward.At this time,the workers had to hold the gas monitor to monitor the gas manually on site,and the original instrument equipment would be easily affected by the environmental temperature,pressure,vision and other factors At the same time,it can not continuously check the gas,so that in the process of gas monitoring,it will be easy to have various problems,there is no way to monitor the gas concentration in the underground construction site normally,and naturally can not provide a certain guarantee for the safety of coal mine.This paper focuses on the problems existing in the coal mine monitoring and monitoring system and the transformation of the discussion,the author combined with some personal practical work experience to put forward a few thoughts,hope to refer to the person to put forward suggestions for modification.
作者
郭晓霞
张少华
王紫民
GUO Xiaoxia;ZHANG Shaohua;WANG Zimin(Shanxi Institute of Engineering and Technology,Yangquan 045000;No.1 Mine Mechanical and Electrical Work Area,Yangquan Coal Group,Yangquan 045000)
出处
《现代制造技术与装备》
2019年第12期154-155,共2页
Modern Manufacturing Technology and Equipment
关键词
煤矿生产
生产安全
监测监控系统
coal mine production
production safety
safety monitoring system