谈离心机弯管下料和湿盐皮带除雾工程的改造

Discussion on the Transformation of Centrifuge Pipe Cutting and Wet Salt Belt Defogging Project

离心机下料的弯管按一定的管径、弯曲弧度和角度制作,内壁作抛光处理,达到很高的光洁度,离心机下料时弯管不堵塞,消除离心机纳米斗下料异物混入食盐中造成的缺陷和隐患。湿盐皮带除雾工程经过数次改造,能有效除去离心机和湿盐皮带现场的雾气,达到理想的效果。

The bending tube of the centrifuge is made according to a certain pipe diameter,bending radian and angle,and the inner wall is polished to achieve a high finish.The bending tube of the centrifuge is not blocked during the cutting of the centrifuge,so as to eliminate the defects and hidden dangers caused by the foreign material in the nanometer bucket of the centrifuge mixed with table salt.After several modifications,the wet-salt belt can effectively remove the fog from the centrifuge and the wet-salt belt and achieve the desired effect.