摘要
轮胎工厂挤出压延车间将胶料加工成各种橡胶半成品,再输送至成型车间组合成型。若胶料中带有金属杂物,易损坏挤出机的螺旋喂料杆。同时带有金属杂物的橡胶半成品流入下一工序,会影响轮胎质量或造成轮胎报废,增加生产成本。因此对于轮胎企业来讲,金属检测设备的连续化和自动化是发展的趋势和要求。而胶条X光机异物自动剔除设备正好能够满足设备自动化的要求,因此能得到广泛的应用。
The tire factory extrusion and calendering workshop processes the rubber into various rubber semi-finished products, and then transports it to the building workshop for combined building. If there is metal debris in the rubber, it is easy to damage the screw feeding rod of the extruder. At the same time, the semifinished rubber product with metal debris enters the next process, which will affect the tire quality or cause tire scrap, and increase production costs. Therefore, for tire companies, the continuous and automation of metal detection equipment is a development trend and requirement. Rubber X-ray machine automatic removal equipment can meet the requirements of equipment automation, so it can be widely used.
作者
洪潮
安桂香
潘孟良
Hong Chao;An Guixiang;Pan Mengliang(Hangzhou Chaoyang Rubber Co.LTD.,Hangzhou 310018,Zhejiang,China)
出处
《橡塑技术与装备》
CAS
2020年第3期35-40,共6页
China Rubber/Plastics Technology and Equipment
关键词
X光机
自动剔除设备
生产成本
X-ray machine
automatic removal equipment
production cost