摘要
鉴于传统的脊柱检测普遍具有放射性,设计出基于MEMS传感器的无放射性脊柱形态检测系统。检测系统使用MEMS姿态传感器测量被测人背部脊柱姿态角度,由微处理器STM32进行数据读取、分析、处理后,在显示模块上显示检测结果,并将检测结果发送到上位机。检测系统可以分析被测人脊柱的Cobb角和轴向躯干旋转角度ATR,判断被测人脊柱是否畸形。
In view of the fact that the traditional spine shape measuring is generally radioactive,a non-radioactive spine shape measuring system based on MEMS sensor is designed in this paper.The measuring system uses MEMS attitude sensor to measure the attitude angle of the spine in the back of the testee.After data reading,analysis and processing by the microprocessor STM32,the test results are displayed on the display module and sent to the host computer.The measuring system can analyze the Cobb angle of the testee’s spine and the axial trunk rotation angle to determine whether the testee’s spine is deformed.
出处
《工业控制计算机》
2020年第1期1-3,6,共4页
Industrial Control Computer
