摘要
通过水模拟实验研究不同试验方案下的熔池混匀时间,分析喷枪角度、喷枪枪位、喷枪流量对出钢过程中钢包熔池搅拌效果,确定最佳的喷吹工艺参数,为现场生产提供理论指导。
Through the water simulation experiment,the mixing time of the bath under different test schemes was studied,and the angle of the nozzle gun,the position of the nozzle gun and the flow rate of the nozzle gun were analyzed to evaluate the mixing effect of the ladle bath during the tapping process,and the optimum injection process parameters were determined.It also provides theoretical guidance for on-site production.
作者
彭煜华
朱荣
魏光升
张官祥
宓宇
PENG Yuhua;ZHU Rong;WEI Guangsheng;ZHANG Guanxiang;MI Yu(Metallurgical and Ecological Engineering School,University of Science and Technology Beijing,Beijing 100083,China;Beijing Key Laboratory of Special Melting and Preparation of High-End Metal Materials,University of Science and Technology,Beijing 100083,China)
出处
《工业加热》
CAS
2020年第1期28-30,34,共4页
Industrial Heating
关键词
电弧炉炼钢
喷粉
水模拟
EAF steelmaking
powder blowing
water simulation
