期刊文献+

基于RFID的金属手术器械管理系统 被引量:3

Metal Surgical Instrument Management System Based RFID
下载PDF
导出
摘要 针对基于RFID的金属手术器械管理过程中存在标签不能正常工作的问题,提出了一种利用金属手术器械表面作为标签的天线与读写器天线进行信息交流的方案。方案中无天线标签与金属手术器械可以看成由该标签激励的半波偶极子天线,并利用HFSS软件对半波偶极子天线进行仿真分析,以便于选取天线的最佳匹配。最后,通过实验验证所提出的方案用在基于RFID的金属手术器械管理系统上的有效性。 Aiming at the problem that the label can not work properly in the management process of metal surgical instruments based on Radio Frequency Identification(RFID),the paper presents information exchange a reader of and an antenna shich uses the surface of metal surgical instrument as a label.In the scheme,no antenna tag and metal surgical instrument can be regarded as a half-wave dipole antenna excited by the tag,and the half-wave dipole antenna is simulated and analyzed by HFSS software,so as to select the best match of the antenna.Finally,the effectiveness of the proposed solution for RFID-based metal surgical instrument management systems is verified by simple experiments.
作者 刘文雨 李奕 孙文文 王艺浓 LIU Wen-yu;LI Yi;SUN Wen-wen;WANG Yi-nong(School of Information and Electronic Engineering,Shandong Technology and Business University,Yantai 264005 China)
出处 《自动化技术与应用》 2020年第1期65-69,92,共6页 Techniques of Automation and Applications
关键词 RFID 金属手术器械 无天线标签 半波偶极子天线 RFID metal surgical instruments antennaless tag half-wave dipole antenna
  • 相关文献

参考文献4

二级参考文献54

  • 1孙兆鹏.基于LTCC的三维微波垂直互连技术.南京:南京电子技术研究所,2007.
  • 2Rieger R, Schweizer B, Dreher H, et al. Highly integrated cost effective standard X band T/R module using LTCC housing concept for automated production. Proceedings of 2002 European SAR Conference Proceedings, Cologne, Germany : VDE VERLAG GMBH Berlin Offenbanch, 2002 : 303-306.
  • 3Martinez-Vdzquez M, Oikonomopoulos-Zachos C, Maulwurf K, et al. Highly integrated antennas and front-ends for 60 GHz WLAN applica- tions. International Journal of Microwave and Wireless Technologies, 2011 ;3(2) : 157-170.
  • 4Klein T, Kulke R, Wolff I. LTCC: a space qualified integration and packing technology for millimeterwave systems. Workshop for the In- ternational Microwave Symposium ( IMS), Montreal ,2012 : 93--99.
  • 5Lap KunYeung, Ke-Li Wu. A compact second-order LTCC bandpass filter with two Finite transmission zeros. IEEE Transactions on Micro- wave Theory and Techniques, 2003 ;51 (2) : 337-341.
  • 6Simon W, Kulke R, Laner A, et al. Efficient band pass filter design for a 25 GHz LTCC multichip module using hybrid optimization. IMAPS 2001, Baltimore, 2001 : 316-320.
  • 7Foster P R. Antenna problems in RFID systems [ C ] /! Proceedings of 1999 IEE Colloquium on RFID Technolo-gy. London:IEEE,1999: 3/1-3/5.
  • 8Dobkin D M, Weigand S M. Environmental Effects on RFID Tag Antennas [ C 1 /! Proceedings of 2005 IEEE MTF-S International Microwave Symposium Digest. Ca- lif, USA : IEEE ,2005 : 135-138.
  • 9Griffin J D, Durgin G D, Haldi A, et al. RF Tag Antenna Performance on Various Materials Using Radio Link Budgets [ J ]. IEEE Antennas and Wireless Propagation Letters ,2006,5 ( 1 ) : 247-250. gineering/Electronics,Computer, Telecommunications and Information Technology. Phetchaburi : IEEE ,2012 : 1-4. Kim D H. Dual-Band Long-Range Passive RFID Tag Antenna Using an AMC Ground Plane [ J ]. IEEE Transactions on Antennas and Propagation, 2012, 60 (6) : 2620-2626. Sim D U, Kim D H, Choi J I, et al. Design of Novel Di- pole-Type Tag Antennas using Electromagnetic Bandgap (EBG) Surface for Passive RFID Applications [ C ] // Proceedings of 2007 IEEE International Symposium on Antennas and Propagation Society. Honolulu, HI : IEEE .2007 ~ 1333-1336.
  • 10Aroor S R, Deavours D D. Evaluation of the State of Pas- sive UHF RFID: An Experimental Approach [ J]. IEEE Systems Journal,2007,1 (2) : 168-176.

共引文献20

同被引文献16

引证文献3

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部