消毒供应室中再生医疗器械的全程质控管理情况探析

Analysis of the Whole Process Quality Control Management of Regenerative Medical Equipment in the Disinfection Supply Room

目的:深入研究消毒供应室中再生医疗器械的全程质控管理情况探析。方法:消毒供应室对1000件再生医疗器械实施全程质控管理,比较控制前后器械菌群浓度以及器械合格情况。同时调查医务人员对器械的满意度情况。结果:控制后各个菌群浓度低于控制前(P<0.05);控制后每个环节器械合格率高于控制前(P<0.05);控制后医务人员满意度高于控制前(P<0.05)。结论:对于消毒供应室来说,负责每个各科室再生医疗器械的消毒、灭菌、包装、储存、方法等工作,该室的工作质量不仅关系患者的生命安全,同时也是感染控制的关键,因此该室要注重再生医疗器械的全程质控管理,降低器械菌群浓度的同时,提高器械的合格率。

Objectives:To study the whole process quality control management of regenerative medical devices in disinfection supply room.Methods:The disinfection supply room carried out whole-process quality control management on 1000 pieces of regenerative medical devices,and compared the bacteria concentration of the devices and the qualification of the devices before and after control.At the same time,the satisfaction of medical staff with the equipment was investigated.Results:After control,the concentration of each flora was lower than before(P<0.05).The qualified rate of each link after control was higher than that before control(P<0.05).The satisfaction of medical staff after control was higher than that before control(P<0.05).Conclusions:The disinfection and supply room is responsible for the disinfection,sterilization,packaging,storage and methods of regenerative medical devices in each department.The quality of work in this room is not only related to the safety of patients,but also the key to infection control.Therefore,the room should pay attention to the whole process of quality control management of regenerative medical devices,reduce the concentration of bacteria on devices,and improve the acceptance rate of devices.