摘要
介绍了基于PROFIBUS-DP通讯协议的西门子S7-1500 PLC与ABB ACS5000变频器在通讯上的应用。分别从变频器配置、适配器和网关配置、PLC配置和PLC编程等方面进行了研究,重点介绍了ACS5000在PROFIBUS-DP协议下参数配置的处理细节,实现了西门子S7-1500 PLC对ACS5000变频器上位的监控。讨论研究了在PROFIBUS-DP通讯协议下西门子系列PLC与ABB ACS系列变频器通讯的一般配置方法,该方法已成功应用于某国产电驱动压裂泵送设备的变频调速系统中,其运行效果良好。
The application of Siemens S7-1500 PLC and ABB ACS5000 inverter in communication based on PROFIBUS-DP is presented.The paper studies the configuration of frequency converter,adapter and gateway,PLC configuration and PLC programming.It focuses on the processing details of parameter configuration of ACS5000 under PROFIBUS-DP protocol.The upper monitoring of Siemens S7-1500 PLC on ACS5000 frequency converter is realized.The paper also discusses the general configuration method of communication between Siemens PLC and ABB ACS series frequency converter under PROFIBUS-DP communication protocol.This method has been successfully applied to the frequency conversion and speed regulation system of a domestic electric drive fracturing pumping equipment,and its operation effect is good.
作者
张力
李双鹏
杨小朋
李磊
赵晓飞
ZHANG Li;LI Shuang-peng;YANG Xiao-peng;LI Lei;ZHAO Xiao-fei(National Engineering Research Center for Oil&Gas Drilling Equipment,Baoji 721002,China;CNPC Baoji Oilfield Machinery Co.,Ltd.,Baoji 721002,China;CNPC Chuanqing Drilling Engineering Co.,Ltd.,Chengdu 610051,China)
出处
《电气传动自动化》
2019年第6期28-32,共5页
Electric Drive Automation
基金
中国石油集团公司项目"7000型电驱压裂橇与柴油驱动压裂机组在线监控系统的集成及现场试验"（2019F-30）
