舰艇损管任务流程仿真系统研究

Research on warship damage control mission procedure simulation system

舰艇发生各类进水、火灾事故后,需要快速采取损管行动,以保证舰艇的安全。损管工作的实施,需要舰艇多个专业战位配合,需要多类监控系统的共同参与完成。然而,由于损管任务的复杂性,目前还不能从损管任务驱动的角度,对相关系统的监测、控制过程进行描述,无法使舰员体验各战位、各系统之间的交互关系。因而,舰员不便于开展损管任务的协同训练。本文首先构建了损管任务流程仿真系统的架构;然后分析了信息数据流程关系;最后通过案例说明了损管任务的时序过程和信息交互。实际应用效果表明,该仿真系统能够模拟“信息监测-任务控制-信息交互”的全过程,不仅可用于舰员开展损管任务处置过程的训练,也可作为舰船平台网的一种损管辅助决策手段。

For guarantying warship's safety,damage control(DC)mission ought to be performed quickly after various flooding and fire accidents.The DC actions need the cooperation of many different battle stations and the participation of various supervisor control system.Because DC tasks are complexity,the supervisor control procedures of correlative systems couldn't be described in the view of DC mission.In addition,crews couldn’t experience the interactive relationship among different battle stations and systems.Therefore,crews couldn’t perform DC mission cooperative training.The architecture of DC mission procedure simulation system is established firstly.Information procedure relationships are analyzed secondly.The time series processes and information interaction of DC mission are explained by analyzing cases.Actual application results indicate that the system can simulate the whole process of“information supervisor-mission control-information interaction”.The system not only can be applied in DC training,but also be used as a DC decision support measures for warship platform management system.