摘要
废液接收贮存系统是放射性废物处理中心的关键子系统之一,系统贮槽液位监测和废液密度分析是该系统运行的重要工作。从放射性废液接收贮存系统特殊性和现场安装条件出发,分析了吹气式测量装置的应用场景及优势、仪表组成和现场安装方案。最后,总结分析了调试中遇到的问题,以期为大家提供吹气式测量装置在放射性处理系统中的应用实践经验。
The waste liquid receiving and storage system is one of the key subsystems in the radioactive waste treatment center. The system storage tank liquid level monitoring and waste liquid density analysis are important tasks for the operation of this system. Based on the particularity of the radioactive waste liquid receiving and storage system and the on-site installation conditions, this paper analyzes the application scenarios and advantages of the air-blowing measuring device, the instrument composition and the on-site installation plan. Finally, the problems encountered in the commissioning are summarized and analyzed, thus to provide practical experience in the application of the air-blowing measuring device in the radioactive treatment system.
作者
周春燕
杨兰菊
许杰
冉洺东
白泽
刘辰龙
Zhou Chunyan;Yang Lanju;Xu Jie;Ran Mingdong;Bai Ze;Liu Chenlong(The First Research Institute,Nuclear Power Institute of China,Chengdu,610000,China)
出处
《仪器仪表用户》
2020年第4期74-76,共3页
Instrumentation
关键词
液位测量
密度测量
吹气式测量装置
废液接收贮存系统
liquid level measurement
density measurement
air blowing type measuring device
waste liquid receiving and storage system
