摘要
针对智能变电站二次设备检修和故障隔离工作的高安全风险,通过对智能变电站二次设备故障状态的分析,提出了一种智能变电站故障诊断新方法用于继电保护测量回路。在变压器阻抗测量的基础上,利用广义变比建立了故障诊断模型,对极性故障进行分析。并通过仿真对该方法的有效性进行验证。结果表明,该方法可以很好地评估电流电压测量回路的故障状况。该研究为智能变电站设备故障诊断的发展提供了参考和借鉴。
Aiming at the high safety risk of secondary equipment maintenance and fault isolation in intelligent substation,based on the analysis of the fault state of secondary system in intelligent substation,this paper proposes a novel fault diagnosis method of relay protection measurement loop for secondary equipment in intelligent substation.Based on the measurement of transformer impedance,the fault diagnosis model is established by using the generalized transformation ratio,and the polarity fault is analyzed.The correctness and validity of the proposed method are verified by simulation.The results show that this method can evaluate the fault condition of current and voltage measurement loop very well.This study provides a reference for the development of the fault diagnosis of intelligent substation equipment in China.
作者
尹相国
张文
路致远
侯峰
王乐挺
Yin Xiangguo;Zhang Wen;Lu Zhiyuan;Hou Feng;Wang Leting(Inspection Company,State Grid Ningxia Electric Power Company,Yinchuan 750001,China;Training Center,State Grid Ningxia Electric Power Company,Yinchuan 750001,China;GridNT,Inc.,Ji’nan 250100,China)
出处
《电测与仪表》
北大核心
2020年第3期39-45,共7页
Electrical Measurement & Instrumentation
基金
国网宁夏电力有限公司科技项(5229CG18003G)
国家重点研发计划(2017YFB0902800)
关键词
智能变电站
故障诊断
二次设备
继电保护
测量回路
intelligent substation
fault diagnosis
secondary equipment
relay protection
measurement loop