摘要
针对某含齿轮箱的高速主推进轴系,基于具有自主知识产权的软件SPSDP 06进行轴系校中计算,并将计算结果与CCS的COMPASS计算结果进行对比分析。结果表明:对于相同的轴系,两种软件的计算结果的相对误差小于5.8%;自主研发的SPSDP 06轴系校中软件已具有工程应用价值。在此基础上给出了轴系现场安装的一些建议。
Shafting alignment calculation based on SPSDP 06 software with self-owned intellectual-property rights was carried out on a high speed main propulsion shafting with gear box.The calculation results were compared with the results using COMPASS developed by CCS.It showed that with the same shaf-ting,the relative error of the calculation results with the two different software was less than 5.8%.The self-developed SPSDP 06 shafting alignment software was thus proved to have the value of engineering application.Some suggestions are given on in-field installation of shafting.
作者
王建政
周庆波
刘张超
Wang Jianzheng;Zhou Qingbo;Liu Zhangchao(Shanghai Marine Diesel Engine Research Institute,Shanghai 200090;Wuhan University of Technology,Hubei Wuhan 430063;National Engineering Laboratory for Marine and Ocean Engineering Power System,Shanghai 201108)
出处
《柴油机》
2020年第2期8-12,共5页
Diesel Engine
基金
国家自然科学基金重点项目(51839005)。
关键词
轴系
校中
软件
安装
shafting
alignment
software
installation