摘要
通过焙烧七水合硫酸亚铁制备Fe2O3负极材料,确定了最佳热分解温度,同时研究了金属硫化物添加剂对铁镍蓄电池放电性能的影响。结果表明:以900热分解制得的Fe2O3,在加入多种金属硫化物添加剂时,放电比容量均显著提升。
Fe2O3 anode material was made by calcination of FeSO4·7H2O.The best calcination temperature was determined,and the influence of metal sulfide addition to the anode on the discharge performance of Fe-Ni battery was studied.The results show that Fe2O3 calcined at 900℃ when several metal sulfide was added to the anode,discharge specific capacity is significantly improved.
作者
边树阳
陈曦
杨少华
洪森
葛永栋
BIAN Shu-yang;CHEN Xi;YANG Shao-hua;HONG Sen;GE Yong-dong(School of Environmental and Chemical Engineering,Shenyang Ligong University,Shenyang Liaoning 110159,China)
出处
《电源技术》
CAS
北大核心
2020年第3期408-410,共3页
Chinese Journal of Power Sources
基金
2018年沈阳理工大学大学生创新创业项目(201810144019)。