摘要
由于传统勘察设计方案对岩土工程勘测点深度计算不精准,因此勘察精度低。针对这一问题,进行复杂地质条件下岩土工程勘察设计方案研究。确定岩土工程勘察点间距;修正岩土工程勘测点深度,完成岩土工程勘察方案设计。设计仿真实验,结果表明,设计勘查方案勘察精度远高于实验对照组,设计的勘查方案勘查能力更强,可以实现对岩土工程有效勘查。
Due to the inaccuracy of the traditional survey and design scheme in the depth calculation of geotechnical engineering survey points,the survey accuracy is low.In view of this problem,the geotechnical engineering investigation and design scheme under complex geological conditions is studied.Determine the spacing of geotechnical investigation points,correct the depth of geotechnical investigation points,and complete the geotechnical investigation scheme design.Design simulation experiment,the results show that the survey accuracy of the design exploration scheme is much higher than that of the experimental control group,and the exploration ability of the design exploration scheme is stronger,which can realize the effective exploration of geotechnical engineering.
作者
许一鹏
李阳
吴坤
XU Yi-peng;LI Yang;WU Kun(Kunming survey,design and Research Institute of China Nonferrous Metals Industry Co.,Ltd,Kunming 650000,China)
出处
《世界有色金属》
2020年第3期255-256,共2页
World Nonferrous Metals
关键词
地质复杂构造条件
岩土工程勘察
设计方案
研究
Geological complex structural conditions
geotechnical investigation
design scheme
research