摘要
基于控制变量法与正交试验法,对海上风机钢桩桩塞器橡胶密封圈性能进行有限元分析,研究了材料硬度、接触面摩擦因数、压缩率和接触面椭圆度,以及截面几何参数对桩塞器橡胶密封圈性能的影响。结果表明:桩塞器橡胶密封圈的材料硬度与压缩率增大均会使其密封性能提升,但同时也会产生负面影响;接触面摩擦因数增大对其密封性能无明显影响;截面几何参数对其工作性能影响从大到小依次为截面宽度、接触面椭圆度、截面长度。
Based on the control variable method and orthogonal test method,the performance of the rubber sealing ring for the steel pile plug of offshore wind turbine was analyzed by finite element method.The influence of material hardness,friction coefficient of contact surface,compression ratio,contact surface ovality and the geometry parameters of the seal cross-section on the performance of the rubber sealing ring was studied.The results showed that the increase of material hardness and compression ratio of the rubber sealing ring would improve its sealing performance,but at the same time,they would also have a negative impact.The increase of contact surface friction coefficient had no significant effect on the sealing performance of the rubber sealing ring.The effect of the geometry parameters of the seal cross-section on the working performance of the rubber sealing ring decreased in the order of section width,contact surface ovality and section length.
作者
崔成梁
高涵宇
王昕宇
王刚
岳前进
CUI Chengliang;GAO Hanyu;WANG Xinyu;WANG Gang;YUE Qianjin(Dalian University of Technology,Panjin 124221,China)
出处
《橡胶工业》
CAS
2020年第4期287-293,共7页
China Rubber Industry
关键词
海上风机
钢桩
桩塞器
橡胶密封圈
密封性能
有限元分析
正交试验
offshore wind turbine
steel pile
pile plug
rubber sealing ring
sealing performance
finite element analysis
orthogonal test