金属材料焊接成型中的主要缺陷及控制措施探讨

Discussion on main defects and control measures in welding and forming of metal materials

金属材质的熔接塑型作业里,常常会发生裂纹、断裂、逢内留有熔渣和焊接时出现小疙瘩等瑕疵情况,如果不可以很好的开展管控,就会使得所有的作业成果和品质下降。所以,在现实作业里要结合有关的经历,合理管控不同种类的熔接塑型瑕疵情况,从源头提高熔接塑型的作业品质,完成规定的目标。

In the welding and plastic molding operation of metal materials,cracks,fractures,slag and small pimples often occur.If the management and control can not be well carried out,all the operation results and quality will be reduced.Therefore,in the practical work,we should combine the relevant experience,reasonably control the defects of different types of fusion molding,improve the operation quality of fusion molding from the source,and achieve the specified objectives.