期刊文献+

汽油机缸内喷水技术研究现状与进展 被引量:4

Research Status and Progress of Water Injection Technology in Gasoline Engine
下载PDF
导出
摘要 回顾了汽油机缸内喷水的系统分类以及机理研究,对汽油机的喷水策略进行了讨论和总结。指出喷水时间和喷水器安装位置是影响进气道喷水能否顺利进入缸内进行蒸发吸热的重要因素,而对于缸内直接喷水来说,喷水时间和喷射压力是影响缸内最终降温效果的重要优化参数。重点阐述了喷水在抑制爆震、取消燃油加浓、扩大压燃运行区域等方面已经取得的研究成果,将喷水技术与传统的EGR技术进行对比分析,对未来喷水技术大规模应用的局限性进行了探讨。 The system classification and mechanism research of water injection in the gasoline engine were reviewed and then the water injection strategy of gasoline engine was discussed and summarized. The water injection timing and the position of water injector were thought to be important factors that would affect whether the injected water in the intake port could enter the cylinder and cause the heat absorption by evaporation successfully or not. The water injection timing and pressure were important optimization parameters that would affect the in-cylinder cooling effect for the in-cylinder water injection technology. The research fruits of water injection such as suppressing knock, eliminating fuel enrichment and expanding the compression ignition operation area were mainly introduced. In the end, the limitations of large-scale application of water injection technology in the future were discussed by comparing it with traditional EGR technology.
作者 范亚东 吴天宝 李雪松 许敏 张勃 FAN Yadong;WU Tianbao;LI Xuesong;XU Min;ZHANG Bo(National Engineering Laboratory of Automotive Electronic Control Technology,Shanghai Jiao Tong University,Shanghai 200240,China;China North Engine Research Institute(Tianjin),Tianjin 3004009 China)
出处 《车用发动机》 北大核心 2020年第2期1-8,共8页 Vehicle Engine
关键词 汽油机 缸内喷水 爆震 gasoline engine in-cylinder water injection knock
  • 相关文献

参考文献4

二级参考文献53

  • 1王建昕,蒋恒飞,王燕军,何邦全,田辛.汽油均质混合气柴油引燃(HCII)燃烧特性的研究[J].内燃机学报,2004,22(5):391-396. 被引量:35
  • 2Huang R J, Zhang Y, Bozzetti C, et al. High secon- dary aerosol contribution to particulate pollution during haze events in China [J]. Nature, 2014, 514(7521) : 218-222.
  • 3Braisher M, Stone R, Price E Particle number emis- sions from a range of european vehicles (C]//SAE Paper. Detroit, MI, USA, 2010, 2010-01-0786.
  • 4Ntziachristos L, Mamakos A, Samaras Z. Overview of the European "particulates" project on the characteriza- tion of exhaust particulate emissions from road vehicles: Results for light-duty vehicles [C]//SAE Pa- per, Detroit, MI, USA, 2004, 2004-01-1985.
  • 5Piock W, Hoffmann G, Berndorfer A, et al. Strategies towards meeting future particulate matter emission re- quirements in homogeneous gasoline direct injection en- gines [C]//SAE Paper. Detroit, MI, USA, 2011, 2011-01-1212.
  • 6Stojkovic B D, Fansler T D, Drake M C, et al. High- speed imaging of OH* and soot temperature and concen- tration in a stratified-charge direct-injection gasoline en- gine[J]. Proceedings of the Combustion Institute, 2005, 30(1): 2657-2665.
  • 7Amin V, Kitae Y. Investigations of the formation and oxidation of soot inside a direct injection spark ignition engine using advanced laser-techniques [C]//SAE Paper. Detroit, MI, USA, 2010, 2010-01-0352.
  • 8Wyszynski L P, Aboagye R, Stone R, et al. Combus- tion imaging and analysis in a gasoline direct injection engine [C]//SAE Paper. Detroit, MI, USA, 2004, 2004-01-0045.
  • 9Catapano F, Iorio D S, Lazzaro M, et al. Characteri- zation of ethanol blends combustion processes and soot formation in a GDI optical engine [C]//SAE Paper. De- troit, MI, USA, 2013, 2013-01-1316.
  • 10Fatouraie M, Wooldridge M, Wooldridge S. In-cylinder particulate matter and spray imaging of ethanol/gasoline blends in a direct injection spark ignition engine [C]//SAE Paper. Detroit, MI, USA, 2013, 2013-01- 0259.

共引文献57

同被引文献23

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部