摘要
提出一种自适应柱状气膜密封,构建气膜-密封环为研究对象,考虑了偏心间隙发散问题,并定义Rayleigh台阶对气膜周期的突变性,建立了气膜雷诺方程和膜厚变化函数关系式的动力润滑数值模型,获得了摩擦副气膜润滑特性,研究结果表明:气膜力随转速和压力升高而增加,泄漏量随压力升高而增加但是随转速增加而下降,说明密封内部压力流占主导地位。随后,利用曲面槽型雕刻技术,结合高速试验台对密封进行测试,结果表明:理论计算模型与试验结果吻合度较高,斜槽区域存在更多擦痕与磨损,说明斜槽浮动性弱于直列槽;但斜槽的切向流动小于直列槽,导致斜槽泄漏量小于直列槽。该研究成果为自适应柱状气膜密封的气体流动规律和应用提供了理论基础。
An adaptive cylindrical gas film seal is proposed.Consider the problem of eccentric gas film convergence and define the abrupt change of the Rayleigh step to the gas film cycle,the relationship between the Reynold equation and the film thickness function is established,and the lubrication characteristics of friction pair are obtained.The results show that the gas bearing force is increase with speed and pressure,the leakage increases with increasing pressure but decreases with increasing speed.It is thus concluded that the internal pressure flow of the seal is dominant.Subsequently,the curved groove engraving technique is proposed,and the experiment is carried out.The results show that there are obvious scratches and wear in the chute groove,and the gas bearing force of chute groove is weaker than the straight groove,but the leakage of chute groove is smaller than the straight groove.It shows that the tangential flow of the chute groove is smaller than that of the straight groove,which results in the leakage of the chute groove is smaller than that of the straight groove.At the same time,the theoretical calculation model is agreeing well with the experimental results.The research results lay a theoretical foundation for the application of adaptive cylindrical gas film seals.
作者
陆俊杰
张炜
谢方民
焦永峰
LU Junjie;ZHANG Wei;XIE Fangmin;JIAO Yongfeng(Zhejiang University Ningbo Institute of Technology,Ningbo 315010,Zhejiang,China;Ningbo FLK Technology Co.,Ltd.,Ningbo 315010,Zhejiang,China)
出处
《化工学报》
EI
CAS
CSCD
北大核心
2020年第S01期346-354,共9页
CIESC Journal
基金
国家自然科学基金项目(51905480)
宁波“科技创新2025”重大专项(2018B10007)
宁波市自然科学基金项目(2019A610161)。
关键词
柱面
微槽
气膜
润滑
试验
磨损
cylinder
microgroove
gas film
lubrication
experiment
friction