期刊文献+

奥氏体化温度对15Cr2MnNi2TiA高强钢强韧性的影响 被引量:1

Effect of austenitizing temperature on strength-toughness of high strength steel 15Cr2MnNi2TiA
原文传递
导出
摘要 采用光学显微镜、扫描电镜分析技术,研究了奥氏体化温度对15Cr2MnNi2TiA低合金高强钢强韧性的影响。结果表明:在830℃奥氏体化温度和170℃时效处理下,钢的力学性能达到最佳强韧性匹配,即抗拉强度为1 339 MPa、屈服强度为1 131 MPa、伸长率为13%、断面收缩率为66%、冲击吸收功为200.2 J、硬度为372HBW。 The effect of austenitizing temperature on strength-toughness of low alloy high strength steel 15Cr2MnNi2TiA was investigated by analysis techniques of optical microscope and scanning electron microscope. The results showed that the mechanical properties of steel reached the best strength-toughness matching at austenitizing temperature of 830 ℃ and aging treatment temperature of 170 ℃,i.e.,the tensile strength was 1 339 MPa,the yield strength was 1 131 MPa,the elongation was 13%,the percentage reduction of area was 66 %,the impact absorption work was 200.2 J,and the hardness was 372 HBW.
作者 王飞 侯少林 赵长顺 李如 白明喜 WANG Fei;HOU Shao-lin;ZHAO Chang-shun;LI Ru;BAI Ming-xi(Technology Center,Fushun Special Steel Group Co.,Ltd.,Fushun 113001,China)
出处 《物理测试》 CAS 2020年第2期9-12,共4页 Physics Examination and Testing
关键词 低合金高强钢 TI 奥氏体化温度 low alloy high strength steel Ti austenitizing temperature
  • 引文网络
  • 相关文献

参考文献3

二级参考文献16

  • 1王利,杨雄飞,陆匠心.汽车轻量化用高强度钢板的发展[J].钢铁,2006,41(9):1-8. 被引量:156
  • 2Tomita Y. Improved Lower Temperature Fracture Toughness of Ultrahigh Strength 4340 Steel Through Modified Heat Treatment[J]. Metallurgical Transactions A, 1987, 18A (8) : 1495.
  • 3Leap M J , Wingett J C. The Effects of Grain-refining Precipitates on the Development of Toughness in 4340 Steel[J].Metallurgical and Materials Transactions A, 1999, 30A (1): 93.
  • 4Robert O R , Horn R M. Further Considerations on the In consistency in Toughness Evaluation of AISI 4340 Steel Aus tenitized at Increasing Temperatures[J].Metallurgical Trans actions A, 1978, 9A (3): 331.
  • 5Hong S G, Jun H J, Kang K B. Evolution of Precipitates in the Nb-Ti-V Microalloyed HSLA Steels During Reheating [J]. Scripta Materialia, 2003,48 : 1201.
  • 6Hodgson P D, Gibbs R K. A Mathematical Model to Predict the Mechanical Properties of Hot Rolled C Mn and Microalloyed Steels [J]. ISIJ International, 1992,32(12) : 1329.
  • 7Fernandez A I, Uranga P, Lopez B. Dynamic Recrystallization Behavior Covering a Wide Austentite Grain Size Range in Nb and Nb-Ti Microalloyed Steels [J]. Materials Science and Engineering A, 2003,361 : 367.
  • 8Poliak E I, Jonas J J. Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation [J]. ISIJ International, 2003,43(5) : 684.
  • 9邢忠文,包军,杨玉英,钟朝廷.可淬火硼钢板热冲压成形实验研究[J].材料科学与工艺,2008,16(2):172-175. 被引量:44
  • 10康永林.汽车轻量化先进高强钢与节能减排[J].钢铁,2008,43(6):1-7. 被引量:163

共引文献16

同被引文献12

引证文献1

;
使用帮助 返回顶部