摘要
由于激光增材制造(Laser Additive Manufacturing,LAM)TC4钛合金加工成形过程的特殊性,导致该合金在力学性能上存在明显的各向异性,同时韧性、疲劳性能不能很好地满足使用要求。从材料组织与力学性能之间的关系出发,介绍了不同热处理工艺对激光增材制造TC4钛合金组织与力学性能的影响,指出了当前激光增材制造TC4钛合金热处理研究中存在的问题,并为后续激光增材制造TC4钛合金的热处理研究提供思路与方向。
Due to the particularity of processing of LAM(Laser Additive Manufacturing)TC4 titanium alloy,the alloy has obvious anisotropy in mechanical properties,and its toughness and fatigue properties cannot meet the requirements of use.Based on the relationship between the microstructure and mechanical properties of materials,this review introduces the influence of different heat treatment processes on the microstructure and mechanical properties of LAM TC4 titanium alloy,points out the existing problems in the heat treatment research of LAM TC4 titanium alloy,and provides thoughts and direction for the following heat treatment research of LAM TC4 titanium alloy.
作者
王普强
吴梦杰
王豫跃
解瑞东
张安峰
WANG Puqiang;WU Mengjie;WANG Yuyue;XIE Ruidong;ZHANG Anfeng(State Key Laboratory for Mechanical Behavior of Materials,Xi’an Jiaotong University,Xi’an 710049,China;State Key Laboratory for Manufacturing Systems Engineering,Xi’an Jiaotong University,Xi’an 710054,China;School of Mechanical and Precision Instrument Engineering,Xi’an University of Technology,Xi’an 710048,China)
出处
《航空制造技术》
2020年第10期56-65,共10页
Aeronautical Manufacturing Technology
基金
国家重点研发计划项目(2016YFB1100102)
国家自然科学基金项目(51775417,51775430)。
关键词
激光增材制造
TC4钛合金
热处理工艺
微观组织调控
力学性能
Laser additive manufacturing
TC4 titanium alloy
Heat treatment process
Microstructure control
Mechanical properties
