摘要
针对双转台五轴数控机床因旋转轴与平移轴联动而产生的非线性误差,提出一种解析模型对非线性误差进行实时预测和补偿。选取刀位文件中的相邻点作为建立模型的刀位点,然后根据经典后置处理中的误差分布建立谐波函数解析的非线性误差模型;用该模型的解析表达式快速预测两刀位点之间的非线性误差,实现了对中间插补点的实时误差补偿。最后对一叶轮零件加工的刀位文件进行MALTLAB仿真分析,验证了所提算法的有效性。
Aiming at the nonlinear error caused by linkage between the rotating shaft and the translational axis for five-axis Machine with dual rotary table,an analytical model for real-time predicting and compensating the nonlinear errors was proposed.Based on the error distribution in classical post processing,the nonlinear error model of harmonic function analysis was established.The analytical expression of the model was used to quickly predict the nonlinear error between two tool points,and the real-time error of the intermediate interpolation points was compensated.The Maltlab simulation analysis for the tool position file of an impeller part was carried out,and the simulation results verified the effectiveness of the proposed algorithm.
作者
吴继春
王笑江
周会成
方海国
WU Jichun;WANG Xiaojiang;ZHOU Huicheng;FANG Haiguo(Engineering Center of Complex Trajectory Processing Technology and Equipment,Ministry of Education,Xiangtan University,Xiangtan 411105,China;National NC System Engineering Research Center,Huazhong University of Science and Technology,Wuhan 430074,China)
出处
《计算机集成制造系统》
EI
CSCD
北大核心
2020年第5期1185-1190,共6页
Computer Integrated Manufacturing Systems
基金
国家重大科技专项资助项目(2017ZX04011012)
国家自然科学基金资助项目(51575210)
湖南省自然科学联合基金资助项目(2017JJ4053)
湖南省教育厅创新平台资助项目(17K091)。
关键词
非线性误差
误差补偿
数控加工
后置处理
nonlinear error
error compensation
computer numerical control machining
post processing
