期刊文献+

库车山前盐膏层与目的层漏失机理分析与治漏措施研究 被引量:5

The Study of Leakage Mechanism and Plugging Measures of Gypsum-salt Formations and Target Zones in the Tian Mountain Front Block in Tarim Basin
下载PDF
导出
摘要 塔里木盆地库车山前构造地质情况和钻井情况复杂,导致钻井过程中井漏频繁发生,钻井液损失量大,造成巨大的经济损失。通过统计库车山前区块漏失情况,分析盐膏层及目的层漏失特征,揭示了库车山前地区盐膏层与目的层钻井液漏失机理,明确了盐膏层及目的层钻井液漏失成因,形成了堵漏基本原则和治漏技术思路,对今后库车山前地区的防漏堵漏工作起到重要的指导意义。 The Tian Mountain Front Block in North Border of Tarim Basin is very complicated,and downhole losses are easily encountered in the process of drilling operation,so the loss amount of drilling fluids is enormous,resulting in huge economic losss.Based on the leakage in the Tian Mountain Front Block,the characteristics of thief zones were analyzed,and the leakage mechanism of drilling fluids was revealed,and the basic plugging principle and lost circulation control technique solution were prospected.The paper can play an important role in the plugging operation in the Tian Mountain Front Block in the future.
作者 李宁 李龙 王涛 刘潇 刘裕双 周志世 郭斌 LI Ning;LI Long;WANG Tao;LIU Xiao;LIU Yu-shuang;ZHOU Zhi-shi;GUO Bin(PetroChina Tarim Oilfield Company,Xinjiang Korla 841000;CNPC Engineering Technology R&D Company Limited,Beijing 102206,China)
出处 《广州化工》 CAS 2020年第11期101-103,共3页 GuangZhou Chemical Industry
基金 中国石油天然气股份有限公司重大科技专项“塔里木盆地大油气田增储上产关键技术研究与应用”(2018E-1808) “柴达木盆地建设高原大油气田勘探开发关键技术研究与应用”(2016E-0109) 中石油天然气集团有限公司科学研究与技术开发项目“阿克纠宾盐下复杂碳酸盐岩水平井高效钻完井技术研究”(2019D-4507)。
关键词 库车山前 钻井液 井漏 漏失层特征 漏失机理 Kuqa piedmont drilling fluid lost circulation characteristic of thief zone leakage mechanism
  • 相关文献

参考文献2

二级参考文献38

  • 1邹德永,程远方,查永进,李维轩.利用岩屑波速随钻检测地层可钻性及优选钻头类型[J].石油大学学报(自然科学版),2005,29(1):37-40. 被引量:9
  • 2张辉,高德利.钻头选型方法综述[J].石油钻采工艺,2005,27(4):1-5. 被引量:70
  • 3Dyke C G, Wu B, Milton-Tayler D. Advances in characterizing natural fracture permeability from mud-log data[J]. SPE Formation Evaluation, 1995, 10(3): 160-166.
  • 4Bertuzzi F, Sanfilippo F, Brignoli M, et al. Characterization of flow within natural fractures: Numerical simulations and field applications[R]. SPE 47268, 1997.
  • 5Beda G, Carugo C. Use of mud microloss analysis while drilling to improve the formation evaluation in fractured reservoirs[R]. SPE 71737, 2001.
  • 6Lietard O, Guillot D, Hodder M. Fracture width LWD and drilling mud/LCM selection guidelines in naturally fractured reservoirs[R]. SPE 36832, 1996.
  • 7Sanfillippo F, Brignoli M, Santarelli F J, et al. Characterization of conductive fractures while drilling[R]. SPE 38177, 1997.
  • 8Lavtov A, Tronvoll J. Mud loss into a single fracture during drilling of petroleum wells: Modeling approach[C]//Proceedings of 6th International Conference on Analysis of Discontinuous Deformation. Trondheim, Norway: International Society for Rock Mechanics, 2003: 189-198.
  • 9Lavtov A, Tronvoll J. Modeling mud loss in fractured formations[R]. SPE 88700, 2004.
  • 10Lavtov A. Newtonian fluid flow from an arbitrarily-oriented fracture into a single sink[J]. Acta Mechanica, 2006, 186(1/2/3/4): 55-74.

共引文献57

同被引文献58

引证文献5

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部