期刊文献+

等离子体氢化对TiAl合金组织及力学性能的影响

Effects of Plasma-hydrogenation on Microstructure and Mechanical Properties of TiAl Alloy
原文传递
导出
摘要 对TiAl合金进行了等离子体氢化处理,研究了氢化处理对TiAl合金组织及力学性能的影响。结果表明,通过LECO ROH600氢氧含量分析仪测得H实际含量为0.060%。置氢处理前后TiAl合金的相组成未发生变化,仍为γ-TiAl和α2-Ti3Al,氢以固溶的形式存在于TiAl合金中。置氢处理后,合金硬度和室温抗压强度均有所提升。高温变形过程中的流变应力更低,材料再结晶程度提高,变形更加均匀。 Effects of hydrogen on the microstructure and mechanical properties of TiAl alloy hydrogenated by plasma were investiagted. The actual hydrogen content measured by the LECO ROH600 hydrogen and oxygen analyzer reach 0.060%. The XRD, SEM, microhardness, room temperature and high temperature mechanical properties, and high temperature deformed microstructures were analyzed for hydrogenated and unhydrogenated TiAl alloys. The results reveal that the phase composition of TiAl alloy with hydrogen is absent change, and it is still γ-TiAl and α2-Ti3Al. Hydrogen exists in solid solution in the TiAl alloy. After the TiAl alloy is hydrogenated by plasma, the hardness and compressive strength at room temperature are improved. The flow stress during high temperature deformation is decreased, and the degree of material recrystallization is improved, so the deformation presents more uniform.
作者 刘永达 董福宇 林雪健 张悦 石明浩 黄宏军 袁晓光 Liu Yongda;Dong Fuyu;Lin Xuejian;Zhang Yue;Shi Minghao;Huang Hongjun;Yuan Xiaoguang(School of Materials Science and Engineering,Shenyang University of Technology)
出处 《特种铸造及有色合金》 CAS 北大核心 2020年第5期567-570,共4页 Special Casting & Nonferrous Alloys
基金 辽宁省教育厅资助项目(LQGD2019001) 辽宁省自然科学基金资助项目(20180510056,2019-ZD-0216)。
关键词 TIAL合金 等离子体氢化处理 组织 力学性能 EBSD TiAl Alloy Plasma-hydrogenation Microstructure Mechanical Properties EBSD
  • 相关文献

参考文献8

二级参考文献60

  • 1刘峰晓,贺跃辉,刘咏,黄伯云,李智.粉末冶金制备TiAl基合金板材的研究现状及趋势[J].稀有金属材料与工程,2005,34(2):169-173. 被引量:18
  • 2师昌绪,仲增墉.中国高温合金40年[J].金属学报,1997,33(1):1-8. 被引量:78
  • 3曹国平 谢成木 等.国外航空钛合金铸件的发展与应用[J].金属学报,1999,35:557-562.
  • 4Kim Y W. Ordered Intermetallic Alloys (Ⅲ)-Gamma Titanium Aluminides[J]. JOM,1994,46(7) :30.
  • 5Yamaguchi M, Inui H, Ito K. High Temperature Structural Intermetallics [J]. Acta Mater, 2000,48 :307.
  • 6Kim Y W. Mierostructural Evolution and Mechanical Properties of Forged Gamma Titanium Aluminide Alloy [J].Acta Metall Mater, 1992,40(6) : 1121.
  • 7Zhang J, Su X, Strom E. Effects of Minor Addition of Ni on Hot-Deformation Behavior of Gamma TiAI Alloy [J]. Materials Science and Engineering, 2002,329 : 499.
  • 8Zhang J, Li S Q, Zou D X. Recent Advances of Wrought TiAl Alloys [J]. Trans Nonferrous Met Soc China,g002,12:592.
  • 9[1]TOSHIMITSU TETSUI.Development of a TiAl turbocharger for passenger vehicles[J].Materials Science and Engineering,2002,A329-331:582-588.
  • 10[2]CLEMENTS H,APPEL F,BARTELS A,et al.Processing and application of engineering γ-TiAl based alloys[A].Proceeding of the 10th World Conference on Titanium[C].Hamburg,IV,2003.2123-2136.

共引文献182

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部