摘要
以SO2排放质量浓度400 mg/m3为标准,对某高含硫天然气净化厂采用化工模拟软件建立硫磺回收及尾气处理工艺全流程模型,针对采用还原吸收工艺、氧化吸收工艺两种方案进行模拟,模拟结果表明,两种方案均能实现SO2减排。从工艺成熟度和经济投资两方面进一步分析,氧化吸收工艺具有流程简单、一次性投资低等特点,推荐该天然气净化厂采用氧化吸收工艺进行尾气处理,以达到尾气SO2减排的目的。
Using chemical simulation software to establish a model for sulfur recovery and tail-gas treatment process in a high-sulfur natural gas purification plant,and taking the SO 2 emission mass concentration of 400 mg/m 3 as the standard to simulate two schemes:reduction-absorption process and oxidation-absorption process.The results showed that both schemes could achieve SO 2 emission reduction.After analyzing the process maturity and economic investment,the oxidation-absorption process had the characteristics of simple flow and low initial investment.The oxidation-absorption tail gas treatment process was recommended to the purification plant to reduce the SO 2 emission.
作者
张倩
卢海东
张碧波
张超
李洋
Zhang Qian;Lu Haidong;Zhang Bibo;Zhang Chao;Li Yang(The 2nd Oil Production Plant,Sinopec Northwest Branch Company,Luntai,Xinjiang,China;School of Petroleum and Natural Gas Engineering,Chongqing University of Science and Technology,Chongqing,China;Southern Sichuan Gas District,PetroChina Southwest Oil&Gasfield Company,Luzhou,Sichuan,China)
出处
《石油与天然气化工》
CAS
CSCD
北大核心
2020年第3期8-13,28,共7页
Chemical engineering of oil & gas
基金
重庆市教委科学技术研究项目(青年)“川东高含硫气田老区净化厂尾气减排关键技术研究”(KJQN201801511)
重庆科技学院研究生科技创新资助项目“万州净化厂溶剂升级对深度脱硫的影响研究”(YKJCX1820116)。
关键词
SO2减排
尾气处理工艺
硫磺回收
天然气净化厂
SO 2 emission reduction
tail-gas treatment process
sulfur recovery
natural gas purification plant