摘要
The dual-phase amorphous/crystalline nanostructured model proves to be an effective method to improve the plasticity of Mg alloys.The purpose of this paper is to explore an approach to improving the ductility and strength of Mg alloys at the same time.Here,the effect of amorphous phase strength,crystalline phase strength,and amorphous boundary(AB)spacing on the mechanical properties of dual-phase Mg alloys(DPMAs)under tensile loading are investigated by the molecular dynamics simulation method.The results confirm that the strength of DPMA can be significantly improved while its excellent plasticity is maintained by adjusting the strength of the amorphous phase or crystalline phase and optimizing the AB spacing.For the DPMA,when the amorphous phase(or crystalline phase)is strengthened to enhance its strength,the AB spacing should be increased(or reduced)to obtain superior plasticity at the same time.The results also indicate that the DPMA containing high strength amorphous phase exhibits three different deformation modes during plastic deformation with the increase of AB spacing.The research results will present a theoretical basis and early guidance for designing and developing the high-performance dual-phase hexagonal close-packed nanostructured metals.
作者
王佳怡
宋海洋
安敏荣
邓琼
李玉龙
Jia-Yi Wang;Hai-Yang Song;Min-Rong An;Qiong Deng;and Yu-Long Li(College of Material Science and Engineering,Xi’an Shiyou University,Xi’an 710065,China;School of Aeronautics,Northwestern Polytechnical University,Xi’an 710072,China)
基金
National Natural Science Foundation of China(Grant No.11572259)
the Natural Science Foundation of Shaanxi Province,China(Grant Nos.2018JM101 and 2019JQ-827)
the Program for Graduate Innovation Fund of Xi’an Shiyou University,China(Grant No.YCS19111004).