摘要
CFD simulation of the permeation process of a 19-core tandem ceramic membrane module was established to investigate flow field and resistance and its change in permeate flux to the membrane element position and the channel of each membrane element.The results show that when the volume flow rate changes from26 m3·h-1 to 89 m3·h-1,the resistance of each part of the membrane module increases gradually.The increase in resistance loss in the membrane element is faster than the plates and the bell mouths.In a single ceramic membrane module,the maximum difference in flow rate of each membrane tube is 7.23%.In a single membrane tube,the outer ring channels 3–5,3–6,3–7,3–8 are relatively slow.The maximum mass flow deviation from the mean is 2.7%.This work helps to clarify the flow mechanism within the modules,optimize the structure of the equipment and provide a reliable basis for the improvement of industrial ceramic membrane modules.
基金
the computational resources support from the High Performance Computing Center of Nanjing Tech University
National Key R&D Program of China(2017YFD0400402)
the financial support from National Natural Science Foundation of China(No.21576132)。
