各向异性三维非对称双锥五模超材料的能带结构及品质因数

Phononic band structure and figure of merit of three-dimensional anisotropic asymmetric double-cone pentamode metamaterials

五模超材料是一类可以解除剪切模量的人工固体微结构,具有类似流体的性质,在声波调控中有着潜在的应用.声学变换作为声波调控的一种重要手段,在超材料声学器件的设计中被广泛使用.声学变换的引入会压缩均匀各项同性五模超材料.因此,需要研究各向异性对三维非对称双锥五模超材料带隙及品质因数的影响.本文利用有限元方法,对各项异性三维非对称双锥五模超材料的能带结构及品质因数进行了研究.研究结果表明,三维非对称双锥五模超材料单模区域的相对带宽随着各向异性的增大而减小,第一带隙的相对带宽增大到123%,品质因数增大到6.9倍.本研究可为声学变换在三维非对称双锥五模超材料中的应用提供指导.

Pentamode metamaterial(PM)is a kind of artificial microstructure extremum material with solid morphology and fluid properties proposed by Milton and Cherkaey.By decoupling the compression and the shear waves,the periodic structure is difficult to be compressed,but the shear deformation occurs easily.Theoretically,acoustic metamaterials consisting of such periodic arrangement of structural units can achieve complete matching with water.Therefore,the characteristics of adjustable modulus anisotropy,small stuffing rate and broadband endow the PMs with excellent acoustic control ability,which has attracted more attention of researchers.In this paper,the narrow-diameter intersection point P(0.25a,0.25a,0.25a)of an isotropic threedimensional PM selected as the reference point in four different directions(X-axis,Y-axis,Z-axis and body diagonal).When the P-point moves,the farther the P-point is,the greater the degree of anisotropy is.The introduction of anisotropy will cause the structural bifurcation of the three-dimensional PM to change structural parameters,and the structural parameters are important factors affecting the band characteristics of the threedimensional PM of Bragg scattering.In order to study the influence of anisotropy on the band structure and pentamode properties of three-dimensional asymmetric double-cone PMs,we use the finite element simulation software COMSOL to calculate the primitive-cell of three-dimensional anisotropic PMs under Bloch boundary conditions.By adjusting the position of P point,four different types of three-dimensional anisotropic asymmetric double-cone PMs are constructed.Since the anisotropy changes in different directions have different effects on the parameters of the asymmetric double-cone structure,the band characteristics and the pentamode characteristics will also receive different degrees of influence.In this paper,the relationship between the degree of anisotropy and the band gap characteristics,single-mode region and figure of merit(FOM)are given,and the result can provide guidance for the design of asymmetric double-cone PM acoustic device.Compared with the isotropic double-cone PMs,the relative bandwidth of the first band gap of the anisotropic double-cone PMs can be broadened to 123%,and the FOM can be increased to 6.9 times.Due to the introduction of anisotropy,Due to the introduction of anisotropy,the structure of three-dimensional asymmetric double-cone PMs are more complex,the demand for sample fabrication is further improved,and the stability of PMs also reduced.Therefore,PMs with high stability and easy to be fabricated still needs further research and exploration.