摘要
以往地震勘探应答器控制方法,不能有效减少噪声对应答器集成音频存在的干扰,导致应答器音质存在杂音,影响使用效果。为此,提出单片机控制下地震勘探应答器集成音频声源级控制方法,构建基于单片机控制的地震勘探应答器,应答器包含了供电模块、主控模块、功放模块、匹配模块、接收模块、收发合置模块以及收/发换能器,采用单片机获取内部输出的工作情况,并基于稀疏正则化的集成音频声源布局优化方法,实现声源级控制。结果表明:所提方法能够有效强化单片机控制下地震勘探应答器集成音频效果,且去噪效果好,该方法控制下应答器工作线性度较优,能够为地震勘探提供更好的勘探方法和勘探设备。
Previous control method of seismic exploration transponders cannot effectively reduce the interference of noise on the integrated audio of the transponder,which results in the existence of noise and affects the sound quality and effectiveness of the transponder.Therefore,a control method for the integrated audio source level of seismic exploration transponders controlled by a single-chip microcomputer is proposed.A seismic exploration transponder based on a single-chip microcomputer is constructed,which includes a power supply module,main control module,power amplifier module,matching module,receiving module,receiving/transmitting module,and receiving/transmitting transducer.The single-chip microcomputer is used to determine the working condition of the internal output,and the audio source level is identified on the basis of the optimization method of the integrated audio source layout.Results show that the proposed method can effectively enhance the integrated audio source level of the seismic exploration transponder controlled by the single-chip microcomputer.Moreover,the proposed method has a good denoising effect.The transponder controlled by the proposed method can provide better exploration results and improve the equipment for seismic exploration.
作者
冯乔
FENG Qiao(Wuxi Vocational Institute of Arts & Technology, Yixing 214200, Jiangsu, China)
出处
《地震工程学报》
CSCD
北大核心
2020年第3期806-811,共6页
China Earthquake Engineering Journal
基金
江苏省现代教育技术研究项目(2018--R-64707)。
关键词
单片机
地震勘探
应答器
集成音频
声源级
MCU
seismic exploration
transponder
integrated audio
sound source level