Seafloor geodetic network establishment and key technologies

Seafloor geodetic network construction involves the development of geodetic station shelter, network configuration design, location selection and layout, surveying strategy, observation model establishment and optimization, data processing strategy and so on. This paper tries to present main technological problems involved in the seafloor geodetic network construction, and seek the technically feasible solutions. Basic conceptions of developing seafloor geodetic station shelters for shallow sea and deep-sea are described respectively. The overall criteria of seafloor geodetic network construction for submarine navigation and those of network design for crustal motion monitoring are both proposed. In order to enhance application performances of the seafloor geodetic network, the seafloor network configuration should prefer a symmetrical network structure. The sea surface tracking line measurements for determining the seafloor geodetic station position should also adopt an approximately symmetrical configuration, and we recommend circle tracking line observations combined with cross-shaped line(or double cross-shape line) observations for the seafloor positioning mode. As to the offset correction between the Global Navigation Satellite System antenna phase center and the acoustic transducer, it is recommended to combine the calibration through external measurements and model parameter estimation. Besides, it is suggested to correct the sound speed error with a combination of observation value correction and parameterized model correction, and to mainly use the model correction to reduce the influence of acoustic ray error on the seafloor positioning. Following the proposed basic designs, experiments are performed in shallow sea area and deep-sea area respectively. Based on the developed seafloor geodetic shelter and sufficient verification in the shallow sea experiment, a long-term seafloor geodetic station in the deep-sea area of 3000 m depth was established for the first time, and the preliminary positioning result shows that the internal precision of this station is better than 5 cm.