摘要
目的以流变学参数弹性模量(G′)、黏性模量(G″)、屈服应力(τ0)、蠕变柔量[J(t)]及损耗系数(tanδ)作为评价指标,优化祖师麻凝胶贴膏剂(Daphnes Giraldii Cortex gel plaster,DGCGP)混合工艺。方法采用正交设计,选用L9(34)正交试验表,以物料混合时的温度、转速以及混合时间为考察因素,以混合后含药胶料的各项流变学参数为评价指标,筛选出DGCGP最佳的混合工艺,并预测适合的涂布条件。结果优选的DGCGP混合工艺为混合温度70℃,转速10 r/min,时间2 h,在此条件下,混合胶料的黏弹性、耐温耐剪切性、抗变形能力以及稳定性均良好。结论采用优化工艺条件制备的DGCGP外观良好,且质地柔软,黏弹性好,质量较佳。
objective To optimize the mixing technology of Daphnes Giraldii Cortex gel plaster(DGCGP)by using rheological parameters elastic modulus(G′),viscous modulus(G″),yield stress(τ0),creep compliance[J(t)]and loss coefficient(tanδ)as evaluation indexes.Methods Using orthogonal design,L9(34)orthogonal design was used to screen out the best mixing technology of DGCGP and predict the suitable coating conditions by taking the temperature,rotating speed and mixing time of the mixed materials as influencing factors and the rheological parameters of the medicated compound as evaluating indexes.Results The optimum DGCGP mixing process was as following:70℃at 10 r/min for 2 h.Under this condition,the viscoelasticity,temperature and shear resistance,deformation resistance and stability of the mixture were all good.Conclusion DGCGP prepared by this optimized process had good appearance,soft texture,good adhesion with skin,good viscoelasticity and better quality.
作者
万玲娟
李真真
魏舒畅
刘晓霞
王继龙
石盘棋
孙晓燕
WAN Ling-juan;LI Zhen-zhen;WEI Shu-chang;LIU Xiao-xia;WANG Ji-long;SHI Pan-qi;SUN Xiao-yan(Gansu Research Center of Traditional Chinese Medicine Pharmaceutical Technology and Engineering,Gansu University of Chinese Medicine,Lanzhou 730000,China)
出处
《中草药》
CAS
CSCD
北大核心
2020年第12期3187-3193,共7页
Chinese Traditional and Herbal Drugs
基金
甘肃省基础研究创新群体项目(1506RJIA034)。
关键词
祖师麻
凝胶贴膏
混合工艺
流变学特性
黏弹性
耐温耐剪切性
抗变形能力
稳定性
弹性模量
黏性模量
屈服应力
蠕变柔量
损耗系数
Daphnes Giraldii Cortex
gel plaster
mixing technology
rheological properties
viscoelasticity
temperature and shear resistance
deformation resistance
stabilization
elastic modulus
viscous modulus
yield stress
creep compliance
loss coefficient