DBU-based CO2 absorption-mineralization system: Reaction process,feasibility and process intensification

Amine-based carbon dioxide(CO2)capture is still limited by high desorption energy consumption.Fixing CO2 into carbonate is a safer and more permanent method.In this work,calcium oxide(CaO)is introduced to perform chemical desorption instead of thermal desorption on 1,8-diazabicyclo[5.4.0]undec-7-ene(DBU)aqueous solution after CO2 absorption.The X-ray diffraction(XRD)patterns of solid products show the formation of calcite calcium carbonate(CaCO3),which prove the feasibility of this method.The effects of reaction temperature,reaction time and Ca2+/CO32-molar ratios on the related reactions in CO2 absorption-mineralization process and CaCO3 precipitation are discussed,and purer CaCO3 is obtained by ultrasonic treatment.The CaCO3 content can be increased to 95.8%and the CO2 desorption ratio can achieve 80%by 30 min ultrasonic dispersion treatment under the conditions(40℃,180 min,Ca2+/CO32-molar ratio=1.0).After five cycles,DBU aqueous solution shows stable CO2 absorption and mineralization ability.Fourier transform infrared spectroscopy(FT-IR)spectra of the reaction process also indicate the regeneration of the solvent.Compared with thermal desorption,this process is exothermic,almost without no additional heat.