摘要
以顺北油田1井区油藏为例,研究断控碳酸盐岩油藏油柱高度的计算方法。分别采用压力折算法和生产井流温测试折算法计算油柱高度。结果表明,压力折算法计算的连通体油柱高度与实际生产效果具有一致性,而生产井流温测试折算法的计算结果与生产实际效果有一定偏差。对于断控碳酸盐岩油藏,适合采用压力折算法来预测油柱高度。
Taking Shunbei Oilfield 1 reservoir as an example,the calculation method of oil column height in fault-controlled carbonate reservoirs is studied.The pressure fold algorithm and the flow temperature test algorithm for production well are used to calculate the height of the oil column.The results show that the height of the connected oil column calculated by the pressure reduction algorithm is consistent with the actual production effect,while the calculation result of the production well flow temperature test calculation algorithm is deviated from the actual production effect.For fault-controlled carbonate reservoirs,the pressure break algorithm is suitable to predict the height of the oil column.
作者
连建文
马剑坤
王仕莉
张满良
樊毅龙
LIAN Jianwen;MA Jiankun;WANG Shili;ZHANG Manliang;FAN Yilong(College of Energy Resources,Chengdu University of Technology,Chengdu 610059,China;Exploration and Development Research Institute of China Petroleum Xinjiang Oilfield Company,Karamay Xinjiang 834000,China;Xi'an Petroleum University,Xi'an 710000,China)
出处
《重庆科技学院学报（自然科学版）》
CAS
2020年第3期36-40,共5页
Journal of Chongqing University of Science and Technology：Natural Sciences Edition
基金
国家自然科学基金项目“断层及相关裂缝形成演化过程的断-损耦合机理研究”(41672133)。
关键词
顺北油田
断控油藏
储层连通体
油柱高度
压力折算法
Shunbei Oilfield
fault-controlled reservoir
reservoir connectivity
oil column height
pressure reduction algorithm
