一种性能优异的光纤总线驱动控制系统设计

Design of optical fiber bus drive and control system

针对基于GML、XML、XHTML三种光纤总线驱动控制系统存在的传输距离短、丢包率大的问题,设计一种基于HTML5的光纤总线驱动控制系统。该系统整体框架由上位机层、中间层以及下位机层构成。根据系统结构确定系统硬件设备,包括微控制器、总线驱动器、光纤总线收发器、显示器等。根据系统硬件组成设计系统运行主程序并对HTML5语言进行分析。实验测试结果表明:与基于GML、XML、XHTML三种光纤总线驱动控制系统相比,利用基于HTML5的光纤总线驱动控制系统进行数据传输,系统传输距离增长,丢包率降低。由此可知,基于HTML5的光纤总线驱动控制系统达到设计目标,弥补了传统方法存在的缺陷,为数据传输提供了有效的参考。

To solve the problems of short transmission distance and high packet loss rate in three kinds of optical fiber bus driver control systems based on GML,XML and XHTML,an optical fiber bus drive control system based on HTML5 is designed.The whole frame of the system is composed of upper computer layer,middle layer and lower computer layer.According to the system structure,the hardware equipment of the system is determined,including microcontroller,bus driver,optical fiber bus transceiver,display and so on.According to the hardware composition of the system,the main program of the system is designed and the HTML5 language is analyzed.The experimental results show that compared with GML,XML and XHTML,the transmission distance of the system increases and the packet loss rate decreases with the use of HTML5-based fiber bus drive control system for data transmission.It can be seen that the optical fiber bus drive control system based on HTML5 achieves the design goal,makes up for the shortcomings of traditional methods,and provides an effective reference for data transmission.