期刊文献+

DSC在富锌涂料干膜测试中的注意事项及影响因素探讨 被引量:1

Points for Attention in DSC Dry Film Tests on Zinc-rich Coatings and Discussion on the Influencing Factors
下载PDF
导出
摘要 运用差示扫描量热仪DSC8000和Diamond DSC对集装箱富锌涂料干膜进行金属锌含量分析,考察了不同外界因素对测试结果的影响,包括样品前处理、图形斜率和试样量大小等,通过探索样品在测试过程中的注意事项及影响因素,从而提高DSC测试金属锌含量的准确度。 Differential scanning calorimeters DSC8000 and Diamond DSC were used to analyze the zinc content of dry zinc-rich container coatings films.The influence of different external factors on test results was surveyed,including sample pretreatment,the graph slope,the sample size,etc.Through exploring points for attention and influencing factors in the sample test process,the accuracy of DSC measurement of zinc content was improved.
作者 滕令坡 TENG Ling-po(COSCO Kansai Paint&Chemicals Co.,Ltd.,Tianjin 300457,China)
出处 《中国涂料》 CAS 2020年第5期65-71,共7页 China Coatings
关键词 差示扫描量热仪 金属锌含量 DSC测试 differential scanning calorimeter zinc content DSC test
  • 相关文献

参考文献6

二级参考文献13

  • 1孙毅,孙广宇,谭志诚,尹安学,王文斌.原油10-70℃比热容的测定[J].石油化工,1997,26(3):187-189. 被引量:7
  • 2ASTMD6580-2000(2005)锌粉颜料和富锌涂料干漆膜中金属锌的含量的测定[S].
  • 3陈健,吴春芳.SY 7517-1992原油比热容测定方法绝热量热法[S].北京:石油工业出版社,1992.
  • 4Zhu F, Wang N, Busch R, et al. Ording of the α-FeSi phase in a Fe73.5Si13.5B9Cu1Nb3 magnet[J]. Scripta Metallurgica. 1991, 25 (9): 2011~2016.
  • 5Anja D, Jtirgen G. Measurement of Heat Capacities of IonicLiquids by Differential Scanning Calorimetry [J]. Fluid Phase Equilib, 2006, 244 (1) : 68 - 77.
  • 6Wu Yong Kung, Lin Kwang Lung, Salam B. Specific Heat Capacities of Sn-Zn-Based Solders and Sn-Ag-Cu Solders Mea- sured Using Differential Scanning Calorimetry [J]. J Electron Mater, 2008, 38(2): 227-230.
  • 7Boller A, Jin Y, Wunderlich B. Heat Capacity Measurement by Modulated DSC at Constant Temperature [J]. J Therm Anal Calorim, 2007, 42(1/2): 307-330.
  • 8Daw J E. Measurement of Specific Heat Capacity Using Dif- ferential Scanning Calorimeter [R]. Idaho: Idaho National Laboratory, 2008: 4.
  • 9蒙根.调制示差扫描量热法测定ABS树脂玻璃化转变温度[J].石油化工,2009,38(12):1342-1345. 被引量:4
  • 10原兵发,王颖,吴津成,冯立云,翁志忠.富锌底漆有效锌含量的测定方法探讨[J].现代涂料与涂装,2010,13(3):38-40. 被引量:3

共引文献35

同被引文献22

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部