摘要
以线性粘滞阻尼器加固剪切型规则框架结构为研究对象,基于能量原理提出附加阻尼系数正比于层间位移平方的分配方式。以六层和十二层钢筋混凝土框架为例,以确保结构在中震时保持弹性状态为设计目标,分别采用附加阻尼系数正比于层间位移平方的分配方式以及现有的分配方式,对结构进行消能减震设计。计算结果表明:有控结构均满足中震不坏的要求,层间位移角限值均未超过1/550,减震效果良好;附加阻尼系数正比于层间位移平方的分配方式得出的总阻尼系数最小,为最经济的设计结果。
Based on the energy theory,the method in which the additional damping coefficient is proportional to the square of story drift is proposed for the linear viscous damper reinforced shear-type regular frame.Taking the six-story and twelve-story reinforced concrete frames as an example,both the the proposed method and the existing method are used to design the damped structures,making sure that the structures remain elastic under moderate-intensity earthquakes.The results show that the structures are free of damage under moderate-intensity earthquakes and their story drift angles are within 1/550.The proposed method produces the smaller damping coefficients,and therefore is more economical.
作者
王子龙
任文杰
杨新磊
陈博文
WANG Zilong;REN Wenjie;YANG Xinlei;CHEN Bowen(School of Civil and Transportation, Hebei University of Technology, Tianjin 300401, China;School of Civil Engineering, Tianjin Chengjian University, Tianjin 300384, China;Tianjin Key Laboratory of Civil Buildings Protection and Reinforcement, Tianjin 300384, China)
出处
《世界地震工程》
CSCD
北大核心
2020年第3期27-37,共11页
World Earthquake Engineering
基金
国家自然科学基金面上项目(51878240)。
关键词
粘滞阻尼器
消能减震
设计方法
阻尼系数
分配方式
viscous damper
energy dissipation
design procedure
damping coefficient
distribution method